InLine DisplayPort 1.4-kabel actief, 8K4K, zwart, goud, 10 m

InLine DisplayPort 1.4 active cable with gold-plated contacts and three-fold shielding, designed for directional connection from a source device to a display. The 10 m black cable uses active signal amplification to maintain high-quality video and audio transmission over long distances and supports a wide range of resolutions up to 8K (7680×4320) and 4K at high refresh rates. The cable is supplied in a resealable PE bag and includes an EAN code.

Advantages

The active DisplayPort 1.4 design preserves signal integrity over 10 m, reducing the risk of artefacts or dropouts. Three-fold shielding and gold-plated contacts improve durability and interference resistance. The directional connector layout ensures correct signal flow from the image source to the display. Supports multiple HDR and colour-depth modes for flexible compatibility with modern graphics cards and monitors.

Suitable for

• Connecting a PC or workstation graphics card to a monitor or projector
• Professional video and post-production setups requiring high-resolution output
• Home or office multi-monitor configurations where long cable runs are needed

Key specifications

• Connector: DisplayPort to DisplayPort
• Cable length: 10 m
• Shielding: 3-fold
• Contacts: Gold-plated
• Direction: Source → Display (directional cable)
• Supported resolutions: UHD-II/FUHD 7680×4320 @30Hz RGB/4:4:4 and @60Hz RGB/4:2:0 or DSC; UHD 3840×2160 @120Hz RGB/4:4:4 8bit (HDR OFF); UHD 3840×2160 @120Hz RGB/4:2:2 12bit (HDR ON); UHD 3840×2160 @60Hz RGB/4:4:4 12bit (HDR ON); Full HD 1920×1080; HD 1280×720
• Packaging: Resealable PE bag with EAN code

How to use

Connect the DisplayPort plug marked for the source end to your graphics card, laptop or other video source. Connect the other DisplayPort plug to the monitor or projector input. Ensure the cable is oriented correctly for directional signal flow (source → display). After connection, configure the display resolution and refresh rate in the operating system or graphics driver to match the supported modes of the cable and the display device.

Recommendations

For best performance, route the cable away from strong electromagnetic interference (large power supplies, motors or fluorescent lighting) and avoid sharp bends. Verify that both source and display support the chosen resolution and refresh rate; use DSC or lower chroma subsampling if required by device limitations.