IP-beveiligingscamera Dahua Technology IPC-HDW3549H-ZAS-PV-27135

The Dahua Technology IPC-HDW3549H-ZAS-PV-27135 is a turret IP security camera for indoor and outdoor surveillance. It features a 1/2.7" 5 MP CMOS sensor with a maximum output resolution of 2960 × 1668 at 20 fps, a 2.7–13.5 mm motorized lens providing a horizontal field of view from 113° to 36° and vertical from 57° to 20°, and a robust IP67-rated housing. The camera supports rotation mode, long-range night vision with IR illumination up to 50 m and warm light up to 40 m, and wired Ethernet connectivity for reliable networked monitoring.

Advantages

The camera integrates Dahua's WizSense AI platform with a dedicated AI chip and deep learning algorithms to distinguish humans and vehicles for accurate alarms and faster target search. It supports advanced video compression (H.265/H.264, SMART+/AI codecs) to reduce bandwidth and storage, SMD 4.0 for improved motion classification, built-in dual microphones and a speaker for two-way audio, and configurable sound-and-light alarm (red and blue). With PoE or 12 VDC power options and IP67 protection, it is suitable for varied installation environments.

Suitable for

• Perimeter and exterior building surveillance
• Entrances, parking areas and driveways
• Indoor public spaces and corridors
• Retail and small-to-medium business monitoring

Key specifications

• Image sensor: 1/2.7" CMOS, 5 MP (2960 × 1668)
• Lens: 2.7–13.5 mm motorized, horizontal FOV 113°–36°, vertical FOV 57°–20°
• Frame rate: max. 20 fps at 5 MP
• Video compression: H.265, H.264, SMART H.264+/H.265+, AI H.264/H.265
• Night vision: IR up to 50 m; warm light up to 40 m
• Audio: built-in dual mic, 1-channel speaker, 1 in/1 out audio
• Storage: microSD support up to 512 GB
• Network: Wired Ethernet LAN; PoE and 12 VDC power
• Protection: IP67
• Physical: turret (ceiling/wall) mount; color: white; weight: 0.885 kg

How to use

Install the turret camera on a ceiling or wall using the included mounting hardware and connect it to your network via Ethernet or PoE, or supply 12 VDC power if PoE is not available. Configure the camera through Dahua's management software or a supported NVR: set resolution and frame rate, enable WizSense human/vehicle detection and SMD areas, configure the AI SSA and one-tap arming/disarming if required, and set up alarm inputs/outputs and two-way audio. Format and insert a microSD card (up to 512 GB) if local recording is needed.

Recommendations

Position the camera to cover primary access routes and avoid aiming directly at strong light sources. For reliable AI detection, define SMD areas in regions with stable lighting and adjust IR/warm light settings to ensure adequate illumination at night.