Koellichaam/radiator GRAUGEAR G-M2HS06 aluminium koper voor M.2 NVMe SSD

The GRAUGEAR Heat pipe Cooler G-M2HS06 is a heatsink designed for M.2 NVMe SSDs that lowers operating temperatures by up to 45%, helping to prolong SSD lifetime and maintain stable performance. Constructed from aluminium with four 4 mm copper heat pipes and an aluminium fin stack, the cooler improves heat dissipation for sustained high-load operation.

Advantages

The combination of copper heat pipes and an aluminium heat sink provides efficient thermal transfer and dissipation. Reduced operating temperature minimizes thermal throttling and can extend the service life of M.2 NVMe SSDs. The compact design is suitable for installation on standard M.2 modules without adding excessive bulk.

Suitable for

• Cooling single M.2 NVMe SSDs in desktops and compact PC builds
• Users seeking to reduce thermal throttling during sustained read/write workloads
• Systems where passive cooling is preferred or where additional airflow is available

Key specifications

• Model: GRAUGEAR G-M2HS06 (MPN: G-M2HS06, EAN: 4260746550450)
• Compatible interface: M.2 NVMe SSD
• Materials: aluminium heat sink with four 4 mm copper heat pipes
• Cooling effect: reduces SSD temperature by up to 45% (manufacturer data)
• Mounting: compatible with standard M.2 module form factors

How to use

Ensure the M.2 NVMe SSD and motherboard mounting area are free of dust and thermal paste. Remove any protective film from the heatsink if present, align the heatsink with the M.2 module, and attach according to the motherboard or drive bay mounting method (screw or clip). Verify that the cooler makes full contact with the SSD controller and NAND area. Reassemble the system and check clearances to nearby components before powering on.

Recommendations

For best results, use the GRAUGEAR G-M2HS06 in systems with at least some case airflow and ensure the heatsink is firmly seated on the SSD. Regularly inspect for dust buildup and clean as needed to maintain thermal performance.