Koper-SFP-transceiver BlueOptics 3FE63343AA-BO 1250 Mbit/s

The BlueOptics Copper SFP transceiver 3FE63343AA-BO is a compact hot-pluggable module designed for short-range copper network connections. With an SFP form factor and a maximum data transfer rate of 1250 Mbit/s, this silver-coloured transceiver fits into standard SFP ports on switches, routers and media converters. It is intended for reliable single-link connections and carries CE, FCC and RoHS compliance for safety and environmental standards. The module's rated mean time between failures (MTBF) of 1,000,000 hours provides a measure of durability suitable for many enterprise and industrial networking environments.

Advantages

The transceiver's SFP form factor ensures broad compatibility with equipment that supports small form-factor pluggable modules, allowing easy upgrades and replacements without changing existing hardware. A maximum data transfer rate of 1250 Mbit/s supports standard-speed network links while keeping power consumption and heat generation low. The silver finished housing aids in physical identification and mechanical resilience. Compliance with CE, FCC and RoHS standards reduces regulatory and environmental concerns during deployment.

Suitable for

• Short-range copper connections between switches, routers and servers
• Edge and access layer links in enterprise networks
• Media converters and modular transceiver slots requiring SFP modules
• Equipment requiring a reliable, low-power 1250 Mbit/s link

Key specifications

• Form factor: SFP (small form-factor pluggable)
• Maximum data transfer rate: 1250 Mbit/s
• Interface: copper SFP
• Housing colour: silver
• Weight: 0.02 kg
• Reliability (MTBF): 1,000,000 hours
• Regulatory compliance: CE, FCC, RoHS

How to use

Power down or follow hot-swap procedures for your network device according to the manufacturer's instructions. Insert the BlueOptics SFP transceiver into a compatible SFP port until it engages securely. Connect a compatible copper network cable to the transceiver interface and verify link status via the host device's indicators or management interface. For removal, observe the device's hot-swap guidance: disengage the module by releasing any retention mechanism and withdraw it straight from the SFP slot.

Recommendations

Install the transceiver in equipment listed as supporting SFP copper modules and verify firmware or compatibility notes from the host device vendor. Avoid excessive mechanical stress and ensure good ventilation. For critical links, keep a spare module on hand and perform firmware or configuration checks after installation to confirm link speed and duplex settings.