Laadkabel voor elektrische voertuigen ROLINE Type 2 naar Type 2 7,5 m 7,4 kW 32 A 250 V

ROLINE Type 2 to Type 2 electric vehicle charging cable, 7.5 m long, designed for single‑phase charging at up to 7.4 kW. The cable supports a maximum current of 32 A and an operating voltage of 250 V, making it suitable for use with home charging stations and public Type 2 sockets that provide single‑phase 32 A. The cable is supplied in black as a single unit and features standard Type 2 connectors at both ends for compatibility with most modern EVs and wallboxes that accept Type 2 inlets.

Advantages

The cable provides reliable single‑phase power delivery up to 7.4 kW with a continuous current rating of 32 A and stable operation at 250 V. Its 7.5 m length offers increased reach from charging points to vehicle inlets without the need for adapters. Using standardized Type 2 connectors on both ends ensures broad compatibility across European charging infrastructure and reduces the need to carry additional connectors or adapters.

Suitable for

• Charging electric vehicles from home wallboxes with Type 2 sockets (single‑phase, 32 A)
• Connecting to public Type 2 AC charging stations that supply single‑phase 32 A
• Temporary charging at workplaces or locations where a 7.5 m reach is required

Key specifications

• Cable length: 7.5 m
• Connector type: Type 2 to Type 2 (both ends)
• Maximum power: 7.4 kW (single‑phase)
• Maximum current: 32 A
• Operating voltage: 250 V
• Color: black
• Number of pieces: 1

How to use

Before use, verify that the charging point supplies single‑phase power at 32 A and that both vehicle and charger accept Type 2 connectors. Park the vehicle close enough to the charging point to allow the 7.5 m cable to reach without tension. Insert the Type 2 connector into the vehicle inlet until it locks, then insert the opposite connector into the charging station or wallbox according to the station's operating instructions. Start the charging session via the vehicle, charging station interface, or associated app. After charging, stop the session, unlock the vehicle inlet if necessary, and store the cable in a dry place.

Recommendations

Use the cable only with compatible Type 2 inlets and single‑phase 32 A charging points. Avoid exposing the cable to extreme temperatures, sharp edges, or heavy mechanical stress. Do not use if the cable or connectors show visible damage. For long‑term storage, coil the cable loosely to prevent kinks and keep connectors protected from moisture and dirt.