Merk: MAGNUM
Voorraad: 5
The MAGNUM MB 15 AK 3 PR is an air-cooled MIG/MAG welding torch with a 3 m cable and EURO connector.Current rating: 180 A in CO2 shielding, 150 A in A..
44,17 €
Excl. btw:36,50 €
Merk: TYSWELD
Voorraad: 237
The TYSWELD DYSZA1,0 is an E-Cu copper welding contact tip with M6 thread for 1.0 mm wire, for MB15 torches...
1,85 €
Excl. btw:1,53 €
Merk: TYSWELD
Voorraad: 137
The TYSWELD 50x100x8 is a welding filter with a shade level of 8 DIN.Length: 100 mmWidth: 50 mm..
1,94 €
Excl. btw:1,60 €
Merk: TYSWELD
Voorraad: 211
The TYSWELD 50x100x10 is a welding filter with a shade level of 10 DIN.Length: 100 mmWidth: 50 mm..
1,94 €
Excl. btw:1,60 €
Merk: TYSWELD
Voorraad: 116
The TYSWELD 50x100x12 is a welding filter with a shade level of 12 DIN.Length: 100 mmWidth: 50 mm..
1,94 €
Excl. btw:1,60 €
Merk: YATO
Voorraad: 11
The YATO YT-08625 is a welding earth clamp with a magnet force of 7 kg and a current carrying capacity of up to 500 A...
9,51 €
Excl. btw:7,86 €
Merk: TYSWELD
Voorraad: 51
The TYSWELD TSW425 is a 0.4 l anti-spatter spray for protecting welding nozzles, torches and workpiece surfaces from metal spatter during electric wel..
5,49 €
Excl. btw:4,54 €
Merk: DONMET
Voorraad: 4
The DONMET flame arrestor is mounted on a cutting torch and works with acetylene, propane and methane gases...
24,97 €
Excl. btw:20,63 €
Merk: KEMPER
Voorraad: 178
The KEMPER oxygen gas cylinder has a pressure of 110 bar and is non-refillable...
35,93 €
Excl. btw:29,69 €
Merk: TYSWELD
Voorraad: 53
The TYSWELD UE-400 is a welding electrode holder for MMA welding with coated electrodes, clamping electrodes from 3.5 mm to 6.3 mm.Welding cable cross..
24,71 €
Excl. btw:20,42 €
Merk: TYSWELD
Voorraad: 46
The TYSWELD UE-300 is a welding electrode holder for MMA welding with coated electrodes. It clamps electrodes from 2.5 mm to 6.3 mm and accepts a weld..
21,66 €
Excl. btw:17,90 €
Merk: TYSWELD
Voorraad: 194
The TYSWELD 2861 is a conical gas nozzle for MIG/MAG welding torches of the MB-25, TW-25 and TBI-250 series, with a 15 mm inner outlet diameter.Nozzle..
3,56 €
Excl. btw:2,95 €
Merk: TYSWELD
Voorraad: 94
The TYSWELD 90x110x8 is a welding filter with dimensions of 110 x 90 mm and a shade level of 8 DIN.Length: 110 mmWidth: 90 mmShade level: 8 DIN..
2,23 €
Excl. btw:1,85 €
Merk: TYSWELD
Voorraad: 100
The TYSWELD 90x110x9 is a welding filter with dimensions of 110 x 90 mm and a shade level of 9 DIN.Length: 110 mmWidth: 90 mmShade level: 9 DIN..
2,23 €
Excl. btw:1,85 €
Merk: AWTOOLS
Voorraad: 633
The AWTOOLS AW50200 is a magnetic welding square with a load capacity of 11.5 kg and dimensions of 82x120x13 mm.Angles: 45°, 90°, 135°Housing material..
3,91 €
Excl. btw:3,23 €
Merk: FACHOWIEC
Voorraad: 5
The FACHOWIEC is a MIG welding torch with an MB-15 cable and a 3 m lead.Cable type: MB-15Cable length: 3 m..
37,71 €
Excl. btw:31,16 €
Merk: GEKO
Voorraad: 12
The GEKO G01861 is a tong-type welding clamp with a current rating of 500 A...
5,61 €
Excl. btw:4,63 €
Merk: AWTOOLS
Voorraad: 606
The AWTOOLS AW50202 is a magnetic welding square with a load capacity of 34 kg and dimensions of 122x190x25 mm, with ferrite magnets in a riveted stee..
8,78 €
Excl. btw:7,26 €
Merk: AWTOOLS
Voorraad: 647
The AWTOOLS AW50201 is a magnetic welding square with a load of 22.5 kg and dimensions of 102 x 155 x 17 mm.Angles: 45°, 90°, 135°Weight: 600 gInterna..
6,13 €
Excl. btw:5,07 €
Merk: LINCOLN ELECTRIC
Voorraad: 1
The Lincoln Electric Lincgun Promig 300 is a 4 m air-cooled MIG welding torch...
166,41 €
Excl. btw:137,53 €
Merk: AWTOOLS
Voorraad: 1160
The AWTOOLS AW50105 is a 500 A welding electrode holder with a total length of 240 mm.Welding method: MMAElectrode diameter: 4.0-8.0 mmMaterial: brass..
3,64 €
Excl. btw:3,01 €
Merk: OERLIKON
Voorraad: 1
The OERLIKON W000050098 is a set of two feed rollers for the Oerlikon Citoline DV4004 wire feeder and for Cemont TF300-TF400 and TF400H feeders used i..
41,42 €
Excl. btw:34,24 €
Merk: TYSWELD
Voorraad: 44
The TYSWELD UE-200 is a welding electrode holder for MMA welding with coated electrodes from 2 to 5 mm.Clamped electrode range: 2-5 mmWelding cable cr..
17,47 €
Excl. btw:14,43 €
Merk: MAGNUM
Voorraad: 4
The MAGNUM 8466 is a 5 m MIG welding torch MB15AK with a EURO connection.Current rating: 180 ADuty cycle: 60%Wire diameter range: 0.6 - 1.2 mmShieldin..
54,34 €
Excl. btw:44,91 €
Merk: TYSWELD
Voorraad: 306
The TYSWELD DYSZA0,8 is a copper welding contact tip for welding torches with M6 thread and 0.8 mm wire diameter, type MB15...
1,85 €
Excl. btw:1,53 €
Merk: TYSWELD
Voorraad: 147
The TYSWELD DYSZA1,2 is a copper welding contact tip with M6 x 1.2 mm thread, suitable for MB15 torches...
1,85 €
Excl. btw:1,53 €
Merk: TYSWELD
Voorraad: 104
The TYSWELD 50x100x11 is a welding filter for masks, shields and visors with a shade level of 11 DIN.Length: 100 mmWidth: 50 mm..
1,94 €
Excl. btw:1,60 €
Merk: MAGNUM
Voorraad: 3
The MAGNUM 19113 is a welding cable plug for ŁW/ŁP50 cables with a current rating of 400 A...
4,28 €
Excl. btw:3,53 €
Merk: YATO
Voorraad: 2
The YATO YT-08721 is a set of 2 magnetic welding holders for holding workpieces at 60°, 90° and 120° during welding and assembly...
14,46 €
Excl. btw:11,95 €
Merk: TYSWELD
Voorraad: 9
The TYSWELD 110x90xSZ-B is a clear welding filter made of glass, sized 110x90 mm...
1,86 €
Excl. btw:1,53 €
Merk: SILVER
Voorraad: 5
The SILVER 10390 is a welding electrode holder for coated electrodes with a current rating of 500 A.Material: brassHandle material: insulated plastic..
4,27 €
Excl. btw:3,53 €
Merk: GEKO
Voorraad: 3
The GEKO G01873 is a magnetic welding angle square, 32,5 kg...
8,39 €
Excl. btw:6,93 €
Merk: AW-NARZęDZIA
Voorraad: 11
The WELDLINE gas lens for WTT 17/18/26 torches is a 2.4 mm gas diffuser.It is a 2.4 mm gas diffuser for WTT2 17 / 18 / 26 torches...
7,34 €
Excl. btw:6,07 €
Merk: LAPP
Voorraad: 2
775,70 €
Excl. btw:641,08 €
Merk: TYSWELD
Voorraad: 396
The TYSWELD 50x100xSZ-B is a 50x100 mm colourless glass filter that protects the darkened filters in welding masks and visors.Size: 50 x 100 mmUse: pr..
1,77 €
Excl. btw:1,46 €
Merk: TYSWELD
Voorraad: 268
The TYSWELD 50x100x9 is a welding filter with a length of 100 mm, a width of 50 mm and a shade level of 9 DIN.Length: 100 mmWidth: 50 mm..
1,94 €
Excl. btw:1,60 €
Merk: AW-NARZęDZIA
Voorraad: 1
The WELDLINE TIG gas lens is marked WTT9/203,2mm.The product is a TIG gas lens marked WTT9/203,2mm...
4,57 €
Excl. btw:3,78 €
1 t/m 40 van 40 getoond (1 pagina's)
Gereedschap, bouw & werkplaats
Lasaccessoires: lastoortsen, toortsonderdelen, elektrodehouders en massaklemmen
Accessoires voor booglassen en MIG/MAG-lassen: lastoortsen zoals de MB-25 met Euro-aansluiting, toortsonderdelen, elektrodehouders, massaklemmen, laskabels en handgereedschap voor lassers. Lasapparaten, elektroden, lasdraad en lasslangen vindt u in eigen categorieën.
33 ProductenToortsen, houders, massaklemmenVia officiële distributeurs
Zo kiest u
Lastoortsen
MIG/MAG-lastoortsen zoals de MB-25 worden geleverd met kabel en Euro-stekker. Controleer het steltype en de kabellengte in de productnaam.
Toortsonderdelen
Toortsonderdelen zoals gasmondstukken, contacttippen en toortshalzen moeten bij het type toorts passen. Let op het toortsmodel in de productnaam.
Elektrodehouders en massaklemmen
Een elektrodehouder houdt de elektrode vast bij het handmatig booglassen, een massaklem verbindt het werkstuk met het lasapparaat. Kies ze op basis van de stroomsterkte in ampère in de productnaam.
Kabels en handgereedschap
Ook laskabels en handgereedschap voor lassers, zoals een slakkenhamer om slakken te verwijderen, vindt u hier.
Wat u hier vindt
Controleer vóór aankoop: Lasaccessoires moeten passen bij uw lasapparaat en toorts. Controleer het stekkertype, de aansluiting en de stroomsterkte in de productnaam. Lasapparaten, elektroden, draad en slangen zitten in aparte categorieën.
Veelgestelde vragen
Wat zijn lasaccessoires?
Lasaccessoires zijn de onderdelen en gereedschappen die met een lasapparaat worden gebruikt: lastoortsen, toortsonderdelen zoals mondstukken en contacttippen, elektrodehouders, massaklemmen, laskabels en gereedschap zoals een slakkenhamer.
Wat is het verschil tussen een elektrodehouder en een massaklem?
Een elektrodehouder houdt de elektrode vast bij het handmatig booglassen. Een massaklem verbindt het werkstuk met het lasapparaat en sluit het lascircuit.
Hoe kies ik een lastoorts?
Kies een toorts die past bij uw lasmethode en uw apparaat. Een MIG/MAG-toorts zoals de MB-25 heeft een Euro-stekker, dus het apparaat heeft een passende Euro-aansluiting nodig.