LED-strip EUROLITE 50530141 5m RGBWW 24V — 5 m, RGB + warmwit, 24 V

EUROLITE 50530141 is a 5-metre LED strip that combines RGB colour mixing with a separate warm white channel to deliver versatile accent and ambient lighting. Designed for 24 V systems, this RGBWW strip allows independent control of red, green, blue and warm white components to achieve saturated colours as well as more natural neutral and warm white tones. Its flexible substrate and self-adhesive backing make it suitable for installation along coves, under cabinets, behind displays and in other locations where slim, continuous illumination is required.

Advantages

The RGBWW configuration provides both vivid colour effects and a dedicated warm white option for improved colour rendering and comfortable illumination. Operating at 24 V reduces brightness drop over longer runs compared with lower-voltage strips and is compatible with common 24 V LED drivers and controllers. The 5 m length offers a continuous run suitable for many residential and light-commercial applications, and the flexible construction allows easy routing around corners and curves.

Suitable for

Key specifications

How to use

Measure and prepare the installation surface to ensure it is clean, dry and free of dust. Cut the strip only at the marked cut points to preserve functionality, then connect to a compatible 24 V LED driver and a controller that supports RGBWW signals. Secure the strip using its adhesive backing or additional mounting clips where needed. Configure colour and intensity via the chosen controller or DMX/compatible interface to achieve the desired effect. For runs longer than 5 m or for parallel circuits, plan power injection points to maintain uniform brightness.

Recommendations

Use a suitable 24 V constant-voltage power supply with adequate wattage margin and a controller that supports separate warm white output to fully utilize the RGBWW capabilities. Avoid exposing the adhesive backing to dirt or moisture before mounting, and consult installation guides for correct cut and solder points. For long-term reliability, ensure adequate heat dissipation and avoid installing on surfaces that exceed the strip’s operating temperature range.