LED-strip EUROLITE PIX-144 RGBW 144 LED's/m, model 51930349

The EUROLITE PIX-144 RGBW 144 LEDs/m (model 51930349) is a continuous LED strip designed for decorative, architectural and stage lighting. With 144 LEDs per meter and an RGBW colour configuration, the strip delivers dense pixel coverage and a dedicated white channel to improve colour rendering and produce accurate whites alongside full-colour output. The flexible PCB and adhesive backing allow for installation on curved or linear surfaces where compact, high-density lighting is required.

Advantages

The high LED density of 144 LEDs per meter provides smooth colour transitions and fine-grained pixel effects without visible gaps. The RGBW configuration separates the white channel from the RGB emitters, enabling cleaner white tones and improved colour mixing. The strip is continuous and can be cut to length at designated points for custom installations. Its flexible construction and mounting options support integration into accent lighting, coves, signage and stage set pieces.

Suitable for

Key specifications

How to use

Plan the installation path and measure the required length, observing marked cut points on the strip. Prepare the mounting surface to ensure it is clean, dry and free of dust or grease before applying the adhesive backing. Connect the strip to a compatible RGBW controller and appropriate power supply rated for the total strip length and LED density. Configure pixel addressing and colour output through a compatible controller or lighting management system, taking into account the need for data signal continuity and power injection on long runs.

Recommendations

Use a power supply and controller sized for the full length of installed strip, and inject power at intervals for long runs to avoid voltage drop. Maintain recommended cut points and follow manufacturer guidance for IP rating and environmental placement; avoid exposure to moisture or extreme temperatures unless an IP-rated version is specified. When soldering or joining segments, secure data and power connections and test sections before final mounting.