Microconnect B-FTP60025B netwerkkabel blauw 0,25 m Cat6 F/UTP (FTP)

The Microconnect B-FTP60025B is a 0.25 m RJ-45 Cat6 networking cable designed for short patch connections between network devices such as switches, routers or patch panels. Compliant with Cat6 standards and tested up to 250 MHz, this blue cable supports high-speed data transfer (up to 10000 Mbit/s) and is backwards compatible with Cat5e and Cat5 installations. The cable features F/UTP shielding to reduce electromagnetic interference and a latch-protected connector to prevent damage during installation in tight spaces.

Advantages

Shielded construction (F/UTP) reduces EMI and crosstalk to maintain signal integrity in environments with potential interference. Short 0.25 m length is suitable for tidy patching and reduces cable clutter. RJ-45 connectors on both ends ensure compatibility with standard Ethernet ports and the latch protection helps avoid connector breakage during routing or installation.

Suitable for

• Short patch connections between switch, modem, router or patch panel
• Home and small office network setups
• Connections where EMI reduction and reliable Cat6 performance are required

Key specifications

• Standard: Cat6, tested up to 250 MHz
• Data rate: up to 10000 Mbit/s
• Length: 0.25 m
• Connectors: RJ-45 — RJ-45
• Shielding: F/UTP (foil shielded, overall)
• Colour: Blue
• Weight: 0.008 kg
• MPN: B-FTP60025B, EAN: 5711783247609

How to use

Connect one RJ-45 end to a network device (for example a switch, router or modem) and the other end to the destination device or a patch panel. Ensure connectors are fully inserted until the latch clicks; the latch protection reduces the risk of connector damage during insertion through confined openings. Use the cable for short-distance patching inside racks, between adjacent ports on network equipment, or to link devices on a desktop or wall outlet.

Recommendations

For optimal performance, avoid bending the cable sharply near the connectors and keep it away from strong sources of electromagnetic noise where possible. Use this shielded Cat6 cable for short, internal patch runs; for longer runs follow structured cabling guidelines and use appropriately rated in-wall or bulk cable.