Microconnect B-FTP60025S netwerkkabel zwart 0,25 m Cat6 F/UTP (FTP)

The Microconnect B-FTP60025S is a 0.25 m Cat6 networking cable with RJ-45 connectors and F/UTP (B-FTP) shielding, designed for reliable high-speed data transfer up to 10000 Mbit/s and tested to the Cat6 standard frequency of 250 MHz. It is suitable for connecting switches, modems, routers and other network devices to patch panels, keystone jacks or wall outlets in home and small office environments. The cable is black and includes latch protection to reduce the risk of connector damage during tight installations.

Advantages

The shielded F/UTP construction reduces electromagnetic interference (EMI) and helps prevent crosstalk, which maintains signal integrity and reduces transmission errors. Backwards compatibility with Cat5e and Cat5 ensures flexible use with existing infrastructure. The short 0.25 m length is convenient for tidy connections between closely located devices, and the latch protection preserves the connector during installation.

Suitable for

• Connecting router to switch or modem in small office and home networks
• Short patch connections between devices and patch panels or keystone jacks
• High-speed Ethernet links where EMI protection is required

Key specifications

• Standard: Cat6, tested to 250 MHz
• Length: 0.25 m
• Data rate: up to 10000 Mbit/s
• Connectors: RJ-45 — RJ-45
• Shielding: F/UTP (B-FTP)
• Colour: Black
• Weight: 0.006 kg
• MPN: B-FTP60025S
• EAN: 5712505707821

How to use

Insert the RJ-45 connector into the corresponding port on each device (router, switch, modem or patch panel) until the latch clicks. Ensure the cable is routed without excessive bending and avoid placing it near strong sources of electromagnetic noise if possible. The short 0.25 m length is intended for close-proximity connections; choose a longer cable if devices are further apart.

Recommendations

For optimal performance, use this shielded Cat6 cable in environments where EMI may affect unshielded links and keep connector latches intact to maintain reliable connections. Do not exceed the cable's intended bend radius and avoid sharp kinks during installation.