Netkabel DELOCK CEE 7/7 90° haaks naar IEC C13, 1 m, 3×0,75 mm², H05VV-F, 250 V

DELOCK power cord with a right-angled earthed CEE 7/7 plug to an IEC 60320 C13 female connector. The cable is 1 m long, uses H05VV-F construction with three conductors of 0.75 mm² each and is rated for 250 V. It is designed for connecting PCs, monitors, servers and other IT equipment to mains sockets with earthing, and its 90° angled plug is suitable for installations with limited space behind devices.

Advantages

The angled CEE 7/7 plug reduces strain on the cable and saves space behind equipment while maintaining an earthed connection for safety. The IEC C13 connector ensures broad compatibility with common power inlets on power supplies, monitors and many IT devices. The H05VV-F cable construction with PVC sheath provides flexibility and mechanical protection appropriate for indoor use. The cord is manufactured to meet applicable EU safety standards, offering reliable performance for both home and professional environments.

Suitable for

• Connecting desktop PCs and workstations to mains outlets
• Powering monitors and small form-factor displays
• Supplying power to servers, network switches and peripherals in rack or shelf setups with limited rear clearance
• General-purpose indoor mains connections for IT and electronic equipment

Key specifications

• Cable length: 1 m
• Plug type: E+F (CEE 7/7), 90° angled
• Connector: IEC 60320 C13 (female)
• Cable type: H05VV-F
• Conductor size: 3 × 0.75 mm²
• Rated voltage: 250 V
• Rated current: up to 6 A
• Color: black

How to use

Insert the IEC C13 connector into the device’s compatible power inlet until it seats securely. Insert the earthed CEE 7/7 plug into a grounded mains socket, taking care that the right-angled orientation aligns with available space behind the device. Ensure the cable is routed to avoid sharp bends, kinks or contact with hot surfaces. Disconnect by pulling the plug rather than the cable to prevent conductor stress.

Recommendations

Use this power cord only for indoor applications and with devices that accept an IEC C13 inlet and a mains supply up to 250 V. Regularly inspect the cable and connectors for damage; replace the cord if insulation, conductors or contacts show wear. Avoid running the cable under carpets or through doorways where it could be crushed. For installations requiring higher current or specific environmental resistance, select a cable with appropriate ratings.