Patchkabel Equip Cat.6A Platinum RJ-45 S/FTP 0,5 m groen

Equip Cat.6A Platinum RJ-45 S/FTP 0.5m Green patch cable is built from high-quality materials and tested to Cat.6A standards to support high-speed data transfer up to 10 000 Mbit/s. The cable uses S/FTP shielding and gold-plated RJ-45 connectors to reduce interference and ensure reliable connections in demanding network environments, especially for 10GBase-T applications. Its 0.5 m length and green jacket make it suitable for short point-to-point connections and visible cable identification.

Advantages

The S/FTP construction provides superior protection against near-end crosstalk and external electromagnetic interference, improving signal-to-noise ratio for stable performance. Gold-plated contacts ensure corrosion-resistant, low-resistance connections. The cable is manufactured and tested to Cat.6A specifications to deliver consistent 10G performance over short distances.

Suitable for

• Short-distance 10GBase-T connections between switches and servers
• Patch panels and rack-mounted equipment in data closets
• Workstation or desktop connections where visible cable colour aids identification

Key specifications

• Cable length: 0.5 m
• Connectors: RJ-45 to RJ-45
• Data rate: up to 10 000 Mbit/s (10GBase-T)
• Shielding: S/FTP (shielded foil with individually shielded pairs)
• Contact plating: gold-plated contacts
• Colour: Green
• Weight: 0.035 kg

How to use

Connect one RJ-45 plug to your network device (switch, router or NIC) and the other to the corresponding port on the destination device or patch panel. Ensure connectors are fully inserted until the latch clicks. Use the 0.5 m length for close connections in racks or between adjacent ports to avoid excess cable slack. Verify link status on connected devices after installation.

Recommendations

For optimal 10GBase-T performance, avoid tightly coiling the cable and keep it away from strong sources of electromagnetic interference. Use this 0.5 m Cat.6A S/FTP patch cable for short, high-speed links where shielding and reliable contact plating are required.