PC-behuizing DeepCool CC560 ARGB V2 midi-tower zwart — ATX/Micro-ATX/Mini-ITX, gehard glas, aRGB, ondersteunt tot 370 mm GPU

The DeepCool CC560 ARGB V2 mid-tower case provides spacious component compatibility, a full-sized tempered glass side panel and four pre-installed ARGB fans to start a build immediately. The V2 refines airflow with an airflow front panel, a large mesh top panel and support for fans on the PSU shroud, while maintaining support for large motherboards, long GPUs and multiple storage drives.

Advantages

The case ships with four PWM-enabled ARGB fans that allow adjustable speeds and lighting. It supports extensive cooling options including a front 360 mm or top 240 mm radiator, up to eight 120 mm or five 140 mm fans, and two additional 120 mm fans on the PSU shroud. The reinforced chassis and tempered glass panel improve durability, and a magnetic top dust filter simplifies maintenance. Cable management space behind the motherboard tray and a top I/O panel with USB 3.0, USB 2.0 and combo audio add convenience.

Suitable for

• Gaming PCs requiring high airflow and ARGB lighting
• High-performance builds with large GPUs and multi-fan cooling
• Systems using E-ATX/ATX/Micro-ATX/Mini-ITX motherboards
• Builds needing multiple HDD/SSD storage configurations

Key specifications

• Form factor: Midi Tower
• Pre-installed fans: 4 x 120 mm ARGB (PWM-enabled)
• Radiator support: Front up to 360 mm, Top up to 240 mm
• Fan support: Up to 8 x 120 mm or 5 x 140 mm (including PSU shroud support for 2 x 120 mm)
• Motherboard support: Mini-ITX, Micro ATX, ATX (up to E-ATX compatible)
• Maximum GPU length: 370 mm
• Maximum CPU cooler height: 165 mm
• Maximum PSU length: 170 mm
• Drive bays: 2 x 3.5", 2 x 2.5" (one HDD bay convertible to a third 2.5" drive)
• Materials: ABS, Tempered glass, SPCC
• Front I/O: 1 x USB 3.0, 1 x USB 2.0, combo audio jack
• Dimensions (approx.): 215 mm (W) x 432 mm (D) x 483 mm (H)
• Weight: 7.2 kg

How to use

Install the motherboard according to its form factor (Mini-ITX, Micro ATX, ATX or compatible E-ATX) and route cables into the 20 mm management area behind the tray. Mount the power supply in the bottom compartment and, if desired, install two 120 mm fans on the PSU shroud. Fit storage drives into the 3.5" and 2.5" bays or convert one HDD bay for an additional 2.5" SSD. Connect the pre-installed ARGB fans to the motherboard or controller, and set PWM fan curves and ARGB lighting through compatible software or the system controller.

Recommendations

For optimal cooling, use a front 360 mm radiator if planning a high-TDP CPU and pair with sufficient case fan intake. Keep the magnetic top dust filter clean and route cables to preserve airflow; ensure PSU length and GPU clearance match the specified maximums before final assembly.