Polymaker Panchroma PLA Dual Matte blauw/groen 1,75mm 1kg (CA04044)

Layer lines can ruin the look of a 3D print, especially on decorative or display pieces. Polymaker Panchroma PLA Dual Matte tackles this with a unique dual-color matte finish that hides layer lines and gives your models a professional, textured appearance. The blue/green color shifts subtly depending on the viewing angle, adding depth without the need for post-processing.

Who is it for

Makers, hobbyists, and designers who want high-quality prints with minimal post-processing. Ideal for prototypes, art pieces, and functional parts where aesthetics matter.

Main features

• Dual-color matte effect reduces visible layer lines
• 1.75 mm diameter with ±0.05 mm tolerance for consistent extrusion
• 1 kg net weight on a recycled cardboard spool
• Compatible with most FDM 3D printers

Specifications

• Material: PLA
• Filament diameter: 1.75 mm
• Diameter tolerance: ±0.05 mm
• Net filament weight: 1 kg
• Color: Blue/Green
• Finish: Dual Matte
• Recommended print temperature: 200 - 230 °C
• Recommended bed temperature: 25 - 60 °C (or off)
• Recommended print speed: 30 - 70 mm/s
• Cooling fan: On
• Density: 1.17 - 1.24 g/cm³
• Tensile strength: 40 - 60 MPa
• Elongation at break: 5 - 15 %
• Heat deflection temperature: ~50 - 55 °C
• Spool material: Recycled cardboard

Tips

For best results, print a temperature tower to fine-tune within the recommended range. A textured or PEI bed helps adhesion; if using a smooth bed, apply a thin layer of glue stick. Store filament in a dry box to prevent moisture absorption.