PV PowerStation invoerkabel ShiverPeaks 0,5 m PV4 naar Anderson-stekkerverbinding

The PV PowerStation feed-in cable ShiverPeaks 0.5 m PV4 to Anderson connector is a short DC interconnect cable designed for connecting the output of a photovoltaic power station to downstream equipment. It provides a PV4 conductor interface on one end and an Anderson-style connector on the other, enabling secure mating with compatible Anderson housings and distribution components. The 0.5 m length reduces cable clutter in compact installations and is intended for short-range power transfer between solar generator outputs, inverters, batteries and distribution blocks.

Advantages

This feed-in cable uses PV4 conductors for standard photovoltaic wiring and an Anderson-style connector for a robust, gendered mating interface. The fixed 0.5 m length simplifies routing in tight layouts and reduces voltage drop for short runs. The cable assembly is made to industry-typical electrical and mechanical conventions to ensure reliable DC contact and straightforward plug-and-play connection with compatible devices.

Suitable for

• Connecting a PV PowerStation output to an inverter input
• Linking solar generator outputs to battery chargers or battery systems
• Routing DC power to distribution blocks or fuse panels in small installations
• Temporary or semi-permanent connections in mobile or portable solar setups

Key specifications

• Cable length: 0.5 m
• Connector A: PV4 conductor interface (standard photovoltaic wiring)
• Connector B: Anderson-style mating connector
• Intended use: DC feed-in for photovoltaic systems
• Suitable for short-range power transfer and compact installations

How to use

Identify the PV4 conductor side and the Anderson-style connector side before installation. With the PV array isolated or the power station switched off, plug the PV4 end into the designated PV output terminal or pigtail and mate the Anderson connector with the corresponding Anderson housing on the target equipment. Ensure connectors are fully engaged and any locking mechanisms are secured. Re-energize the system and verify correct polarity and voltage at the receiving device before normal operation.

Recommendations

Use this cable only with compatible PV4 wiring and Anderson-style connectors; avoid exposure to prolonged mechanical strain, sharp bends, or environments with sustained high moisture unless appropriate protection is applied. For outdoor or permanent installations, route the cable to minimize UV and abrasion exposure and consult local electrical regulations and installer guidelines for secure and code-compliant connections.