RUKO KEB-HSS-Mod.110-32.0mm veerkrachtige elektromagnetische rem

Industrial machinery requires reliable holding and emergency stopping without the risk of unintended movement. The RUKO KEB-HSS-Mod.110-32.0mm is a spring-applied electromagnetic brake that engages when power is removed, delivering a static friction torque of 160 Nm to keep shafts securely in place.

Who is it for

This brake is built for machine builders and maintenance teams integrating or servicing flange-mounted braking systems on motors, gearboxes, and other rotating equipment. It suits applications where a dry-running, electrically released brake is needed for holding and emergency stop functions.

Main features

• Spring-applied, electrically released design for fail-safe holding
• 160 Nm static friction torque for demanding loads
• 32.0 mm H7 bore diameter for direct shaft mounting
• Rated for 205 V DC operation with 45 W power consumption
• Dry-running with two friction surfaces for consistent performance
• IP54 protection against dust and splashing water
• Thermal class F insulation for operation up to 155°C
• Fast response: release and engagement times below 50 ms

Specifications

• Brake type: Spring-applied electromagnetic brake
• Operating principle: Dry running
• Static friction torque: 160 Nm
• Rated voltage: 205 V DC
• Rated power: 45 W
• Rated current: 0.22 A
• Bore diameter: 32.0 mm (H7)
• Max permissible speed: 3600 rpm
• Protection class: IP54
• Thermal class: F (155°C)
• Nominal air gap: 0.3 mm
• Maximum air gap: 0.7 mm
• Moment of inertia: 0.0015 kgm²
• Number of friction surfaces: 2
• Mounting type: Flange mount
• Application: Holding and emergency stop
• Release time: < 50 ms
• Engagement time: < 50 ms

Tips

Verify the air gap during installation and after break-in to maintain consistent torque. The brake is flange-mounted; ensure alignment with the shaft to avoid uneven wear. For emergency stop applications, confirm that the power supply can interrupt the coil circuit within the required time.