SCART-kabel ShiverPeaks 97543-10SPP — 1,5 m lengte, standaard SCART-aansluiting

SCART cable ShiverPeaks 97543-10SPP — 1.5 m length, standard SCART connection is a 1.5 metre analogue audio/video lead designed to connect devices with standard SCART sockets. The cable supports composite video, RGB and stereo audio signals and is intended for use with televisions, DVD players, set-top boxes and VCRs that use a wired SCART interface. The lead provides a straightforward wired link for legacy AV systems where a reliable analogue connection is required.

Advantages

The cable offers a universal SCART-to-SCART connection in a common 1.5 m length suitable for typical home installations. It transmits composite video, RGB and left/right audio channels over a single convenient lead, reducing cable clutter and simplifying the connection of older AV components. The standard SCART connectors ensure compatibility with a wide range of legacy equipment and make setup quick without additional adapters.

Suitable for

• Connecting a DVD player to a television with SCART input
• Linking set-top boxes or satellite receivers to TVs using SCART
• Tying VCRs or other analogue playback devices into a home AV chain
• Temporary or permanent wired connections in living rooms, media cabinets or AV racks

Key specifications

• Cable length: 1.5 m
• Connector type: standard SCART male to SCART male
• Signal support: composite video, RGB video, stereo audio
• Use: analogue A/V transmission for legacy equipment
• Typical application: home audio/video setups and consumer electronics

How to use

To use, align each SCART connector with the corresponding SCART socket on your devices and insert fully until it clicks or seats securely. Ensure both devices are powered off before connecting to avoid signal noise; after connection, power on the devices and select the appropriate input on the television or receiver. For RGB or composite selection, verify the device output mode if multiple video formats are supported. Route the cable to avoid sharp bends and keep it away from power cords to reduce potential interference.

Recommendations

For best results, use the cable for direct analogue connections between SCART-equipped devices in domestic environments. Avoid excessive bending or tension on the cable and disconnect by pulling the connector body rather than the cable itself. If signal quality is critical, check device output settings and try alternative SCART-compatible inputs on the display to confirm the preferred video mode.