SFP+-transceiver BlueOptics 45W2417-BO 10000 Mbit/s glasvezel

The BlueOptics 45W2417-BO is an SFP+ fiber optic transceiver designed for 10 Gbit/s network links. The module follows the SFP+ form factor, offers a maximum data transfer rate of 10000 Mbit/s and is supplied in a compact silver housing with a lightweight construction of approximately 20 g. Compliance with CE, FCC and RoHS standards and a mean time between failures (MTBF) of 1,000,000 hours indicate suitability for deployment in managed switches, servers and optical uplinks where standardized, hot-pluggable modules are required.

Advantages

The transceiver provides a standardized SFP+ interface for straightforward compatibility with equipment that accepts SFP+ modules and supports 10 Gbit/s links. Its compact and lightweight metal housing simplifies installation and reduces port loading. Regulatory compliance and a high MTBF deliver predictable operational behavior and help meet safety and environmental requirements in commercial or data centre environments.

Suitable for

• 10 Gbit/s Ethernet uplinks between switches and routers
• Server network interfaces and Fibre Channel converters that accept SFP+ modules
• Optical links in data centres and telecommunication racks
• Replacement or expansion of SFP+ ports in managed network equipment

Key specifications

• Form factor: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Interface type: SFP+ optical
• Housing colour: silver
• Weight: 0.02 kg
• MTBF: 1,000,000 hours
• Standards compliance: CE, FCC, RoHS

How to use

Install the SFP+ transceiver into a compatible SFP+ port on the switch, router or server while the device is powered according to the host equipment manual for hot-pluggable modules. Connect the appropriate single-mode or multimode fiber patch cord (check host and module optics compatibility) to the transceiver’s optical interface, ensuring correct polarity and clean connectors. After insertion and connection, verify link status using the host device management interface and monitor port indicators for proper operation.

Recommendations

Confirm optical type and wavelength compatibility with the host device and the fibre cabling before installation. Keep connector end faces clean and use dust caps when the transceiver is not connected. Avoid mechanical stress on the module and connected patch cords; follow ESD handling precautions during installation and removal.