SFP-transceiver BlueOptics SFP-SM/LC-EEC-BO 155 Mbit/s 1310 nm

The BlueOptics SFP-SM/LC-EEC-BO is a single-mode fiber SFP transceiver module designed for 100BASE-LX applications with a maximum data rate of 155 Mbit/s and an operating wavelength of 1310 nm. The module uses an SFP interface and an LC duplex connector, supports optical transmission over single-mode fiber and is compatible with Hirschmann hardware platforms that accept the corresponding Hirschmann SFP modules. The transceiver is CE, FCC and RoHS certified and weighs approximately 20 g, making it suitable for compact network equipment.

Advantages

The transceiver follows MSA SFP mechanical standards and provides both transmit and receive functions at 1310 nm for reliable single-mode links. It is factory-tested for compatibility with Hirschmann devices and uses selected components that meet industry quality standards to ensure long service life and stable performance. The small metal housing and standardized SFP form factor enable easy hot-plug installation and straightforward replacement in supported switches, routers or media converters.

Suitable for

• Upgrading or replacing SFP ports in switches and routers that support 100BASE-LX modules
• Establishing single-mode fiber links for Ethernet or related protocols over medium distances
• Industrial and enterprise networks requiring CE/FCC/RoHS-compliant fiber transceivers

Key specifications

• Interface type: SFP (hot-swappable)
• Maximum data transfer rate: 155 Mbit/s
• Wavelength: 1310 nm (transmit and receive)
• Connector: LC duplex
• Fiber type: Single-mode fiber
• Housing colour / finish: Silver metal housing
• Weight: approx. 0.02 kg

How to use

Insert the SFP transceiver into an available SFP slot on a compatible Hirschmann switch, router or media converter while the host device is powered according to the vendor's hot-swap guidance. Connect an LC duplex single-mode fiber patch cable, ensuring TX and RX alignment between endpoints. Configure the host interface for the appropriate speed and protocol if manual settings are required. Verify link status and, if available, check digital diagnostic readings through the host system to confirm proper operation.

Recommendations

For optimal performance, use single-mode fiber patch cords and follow connector cleanliness practices. Confirm DDM/DOM support in the host hardware before relying on diagnostic readings and consult the device datasheet for maximum supported link distance and power budget calculations.