SFP-transceiver BlueOptics USFP-GB/SS14-3-BO 1250 Mbit/s 1490 nm

The BlueOptics USFP-GB/SS14-3-BO is an SFP transceiver module for single-mode fiber networks. It supports a maximum data transfer rate of 1250 Mbit/s and operates at a wavelength of 1490 nm. The module features a metal housing in silver color and a compact, lightweight design (approx. 20 g), suitable for installation in SFP-compatible ports on switches, routers and other network devices that accept standard SFP modules.

Advantages

The metal housing provides mechanical durability and thermal stability while the SFP form factor ensures wide interoperability with equipment that follows MSA-compliant SFP standards. With a 1250 Mbit/s data rate and a 1490 nm operating wavelength, the transceiver supports common gigabit optical links where this wavelength is required. Its small size and low weight make it easy to handle and mount in racks or chassis with dense port layouts.

Suitable for

Key specifications

How to use

Insert the SFP transceiver into an appropriate SFP slot on the host device while the device is powered down or following the vendor’s hot-swap guidance. Connect a single-mode fiber patch cable with the correct connector type to the transceiver’s optical port. Configure the network device as required for the link (speed, duplex and any vendor-specific settings) and verify link status via the host device interface. Follow the host device documentation for enabling or verifying any digital diagnostics or monitoring functions if supported.

Recommendations

Use single-mode LC/LC or LC-simplex patch cords compatible with 1490 nm transmission and ensure connectors and fiber are clean before making the connection. Verify that the host equipment supports SFP modules operating at 1490 nm and a 1250 Mbit/s signalling rate. When handling the transceiver, avoid touching the optical interface and store unused modules with a protective dust cap to prevent contamination.