SFP-transceivermodule BlueOptics 2891754-BO 1250 Mbit/s glasvezel

The BlueOptics 2891754-BO is an SFP fiber optic transceiver module designed for single-port network equipment. With a maximum data transfer rate of 1250 Mbit/s and a compact SFP form factor, this silver-coloured module provides a compact solution for adding optical connectivity to switches, routers or media converters. The module is lightweight at 20 g and rated with an MTBF of 1,000,000 hours, meeting CE, FCC and RoHS compliance requirements for use in commercial and industrial networking environments.

Advantages

The transceiver supports standard SFP slot compatibility and delivers up to 1250 Mbit/s throughput for typical multimode or singlemode fibre applications depending on system configuration. Its small size and low weight simplify installation and reduce strain on device ports. Compliance with CE, FCC and RoHS standards ensures regulatory conformity and safe materials. The high MTBF value indicates long-term reliability under normal operating conditions.

Suitable for

• Upgrading Ethernet ports to optical links in switches and routers
• Media converters bridging copper and fiber segments
• Short- to medium-distance fiber connections in enterprise networks
• Replacing or expanding SFP transceivers in patch panels and network appliances

Key specifications

• Form factor: SFP (Small Form-factor Pluggable)
• Maximum data transfer rate: 1250 Mbit/s
• Weight: 0.02 kg
• Colour: Silver
• Mean Time Between Failures (MTBF): 1,000,000 hours
• Regulatory compliance: CE, FCC, RoHS

How to use

Insert the BlueOptics SFP transceiver into a compatible SFP slot on your network device while the device is powered down or following hot-swap procedures recommended by the device manufacturer. Ensure the module is fully seated until it clicks and then connect the appropriate fiber optic cable to the module's optical port. Verify link status through the host device's interface and configure network settings such as speed and duplex if required by the equipment. Follow device vendor instructions for diagnostics and firmware compatibility.

Recommendations

Handle the module by its housing and avoid touching the optical connector to prevent contamination. Use dust caps when the module is not connected. Match the transceiver type and fiber specification (singlemode or multimode) to the installed cabling and verify compatibility with the host device's SFP slot to ensure reliable operation.