SFP-transceivermodule BlueOptics 3HE00028AA 1250 Mbit/s 1310 nm

The BlueOptics 3HE00028AA is an SFP transceiver module designed for fiber optic data communication at a line rate of 1250 Mbit/s. Operating at a wavelength of 1310 nm, this compact module provides a standard small-form-factor pluggable interface for insertion into compatible network switches, routers or media converters. With a lightweight silver metal housing and SFP interface, the module supports reliable serial-optical data transfer for short- to medium-range fiber links where 1310 nm transmission is required.

Advantages

The module offers a standardized SFP form factor for hot-pluggable installation, ensuring straightforward replacement or upgrade without powering down equipment. Its 1310 nm wavelength is suited for multimode and single-mode fiber links depending on system design, and the 1250 Mbit/s data rate matches common fibre channel and legacy network applications. The compact, metal-bodied design with a low weight reduces port load and maintains rack and chassis balance.

Suitable for

• Optical uplinks between network switches and routers
• Media converters and optical line cards with SFP slots
• Legacy 1.25 Gbit/s fibre channel or Ethernet segments
• Short- to medium-distance single-mode fiber links using 1310 nm

Key specifications

• Interface type: SFP (Small Form-factor Pluggable)
• Maximum data transfer rate: 1250 Mbit/s
• Wavelength: 1310 nm
• Weight: 0.02 kg
• Color: Silver

How to use

Ensure the host device is powered and supports SFP modules before insertion. Remove protective caps from the fiber connector and module port, then align the module with the SFP slot and insert until it clicks into place. Connect the appropriate fiber patch cable to the module's optical interface, observing proper polarity. Verify link status in the host device management interface and monitor for stable connection and error counters. To remove, disengage any retention latch and pull the module straight out, replacing protective caps as needed.

Recommendations

Use this BlueOptics SFP module in equipment that explicitly supports third-party SFPs and the 1250 Mbit/s 1310 nm specification. Keep the optical connectors clean, avoid bending fiber beyond recommended radii, and store unused modules with dust caps in a dry, static-free environment.