SFP-transceivermodule BlueOptics 3HE00062AA-BO koper 1250 Mbit/s

The BlueOptics 3HE00062AA-BO Copper SFP transceiver module supports data transfer rates up to 1250 Mbit/s in a compact SFP form factor. Designed for copper connections, this silver-coloured module is lightweight at 20 g and built to industry standards. It carries CE, FCC and RoHS compliance and a rated mean time between failures (MTBF) of 1,000,000 hours, making it suitable for integration into a variety of network devices that accept SFP modules.

Advantages

This Copper SFP module offers a standardized SFP interface for straightforward hot-pluggable installation and interchangeability with compatible equipment. With a maximum data rate of 1250 Mbit/s it supports common Ethernet and fiber-channel link speeds where copper SFPs are used. Its small size and low weight simplify deployment in dense switch or router chassis, while CE, FCC and RoHS compliance ensures it meets common regulatory and environmental requirements. The 1,000,000-hour MTBF provides an indication of long-term reliability under typical operating conditions.

Suitable for

• Upgrading or replacing SFP ports on switches and routers
• Short-range copper connections in data center and enterprise networks
• Small-to-medium office networks requiring compact transceiver modules

Key specifications

• Form factor: SFP (small form-factor pluggable)
• Interface: Copper SFP
• Maximum data transfer rate: 1250 Mbit/s
• Color: Silver
• Weight: 0.02 kg
• Mean time between failures (MTBF): 1,000,000 hours
• Regulatory compliance: CE, FCC, RoHS

How to use

Power down the host device or follow the vendor’s hot-swap instructions if supported, then insert the module into an available SFP slot until it seats firmly. Connect the copper link cable to the module’s interface and configure the host port for the appropriate speed and duplex settings if required. Monitor link status indicators on the host device to confirm the connection. Follow the equipment manufacturer’s guidelines for firmware or driver compatibility when integrating the transceiver into a networked system.

Recommendations

Use the BlueOptics SFP module in compatible SFP ports and avoid excessive mechanical stress when inserting or removing the unit. For reliable operation maintain ambient conditions within the host device’s specified temperature and humidity ranges and verify compatibility with the network equipment vendor before deployment.