SFP-transceivermodule BlueOptics 852-202-BO 155 Mbit/s zilver

The BlueOptics 852-202-BO 155 Mbit/s Silver is a compact fiber optic SFP transceiver module designed for use in network equipment that accepts SFP form-factor modules. It supports a maximum data transfer rate of 155 Mbit/s and comes in a silver housing. With a mean time between failures (MTBF) of 1,000,000 hours and a lightweight construction of approximately 20 grams, the module is intended to provide stable optical connectivity in constrained spaces and rack-mounted systems.

Advantages

The module's SFP interface allows hot-pluggable installation into compatible switches, routers or media converters without powering down the host device. Its small form factor and low weight make it suitable for dense port environments and for equipment with limited space. The specified MTBF indicates a design focused on longevity and reduced maintenance intervals. A straightforward silver housing supports easy identification and handling during installation.

Suitable for

• Fiber-optic uplinks between switches and routers
• Media converters and optical network equipment
• Compact network devices with SFP slots
• Environments requiring reliable, moderate-speed optical links

Key specifications

• Form factor: SFP (small form-factor pluggable)
• Maximum data transfer rate: 155 Mbit/s
• Weight: approx. 0.02 kg
• Housing colour: silver
• Reliability indicator: MTBF 1,000,000 hours

How to use

Insert the SFP transceiver into an empty SFP slot on the network device until it latches; the host device should recognize the module automatically if it supports standard SFP modules. Connect an appropriate fiber optic cable to the transceiver's optical interface, observing correct connector type and polarity. Configure the network device for the required link speed and optical settings as needed. For removal, release the module latch and pull the transceiver straight out, taking care to protect optical interfaces from dust and contamination.

Recommendations

Store and operate the transceiver within equipment and environmental limits specified by the network hardware manufacturer. Use compatible fiber connectors and clean endfaces before connection to avoid signal loss. When deploying multiple modules in a rack, allow adequate airflow around occupied SFP ports and follow the host device’s guidelines for hot-plugging.