SFP+-transceivermodule BlueOptics AA1403017-E6-BO 10000 Mbit/s 1310 nm

The BlueOptics AA1403017-E6-BO is an SFP+ fiber optic transceiver module designed for 10 Gbit/s network links. It supports a maximum data transfer rate of 10000 Mbit/s and transmits at a wavelength of 1310 nm. Housed in a durable metal casing with a silver finish and weighing approximately 20 g, the module is compact and compatible with SFP+ ports for high-speed aggregation and uplink connections in data center and enterprise networks.

Advantages

The transceiver offers a standardized SFP+ interface for broad compatibility with switches, routers and optical equipment. Its metal housing provides mechanical stability and heat dissipation while the 1310 nm wavelength enables reliable single-mode fiber transmission over typical metro and campus distances. Lightweight construction simplifies handling and installation, and the module's support for 10 Gbit/s data rates meets common requirements for high-throughput links.

Suitable for

• 10 Gbit/s uplinks between switches and routers
• High-speed connections in data centers and server rooms
• Metro and campus single-mode fiber links over intermediate distances
• Equipment requiring a compact SFP+ form factor

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Optical wavelength: 1310 nm
• Housing: metal, silver colour
• Weight: approximately 0.02 kg

How to use

Install the BlueOptics SFP+ module into a compatible SFP+ slot on a switch, router or transceiver cage until it latches. Connect single-mode fiber with the appropriate LC connector to the module's optical port, observing correct transmit/receive orientation. After physical installation, verify link status and configure the device port settings if required by your network equipment. Handle the module by its body and avoid touching the optical interfaces; use protective caps when the module is not connected.

Recommendations

Use compatible single-mode fiber and follow manufacturer guidelines for optical power and distance. Verify device compatibility with SFP+ ports and firmware support before deployment. Store the module in a dry, dust-free environment and keep protective caps on unused ports to maintain optical performance.