SFP-transceivermodule BlueOptics AC-SFP-TX-T2A-BO 1250 Mbit/s RJ-45

The BlueOptics AC-SFP-TX-T2A-BO is a compact SFP transceiver module designed for 1000BASE-T applications. It provides a 1250 Mbit/s maximum data transfer rate over twisted pair cabling through an RJ-45 interface and is housed in a durable silver metal casing. With a light weight of 20 g and an MTBF of 1,000,000 hours, the module is intended for straightforward installation in compatible SFP slots and for long-term operation in network equipment that supports standard MSA SFP modules.

Advantages

The transceiver offers a standardized RJ-45 electrical interface for Ethernet links, a metal housing for mechanical stability and EMI shielding, and a compact SFP form factor for easy hot-pluggable installation. With a rated maximum throughput of 1250 Mbit/s and an advertised mean time between failures of 1,000,000 hours, the module aims to deliver stable data transmission and reduced maintenance intervals in typical network deployments.

Suitable for

• Gigabit Ethernet connections over copper using SFP ports
• Switches, routers and other rack devices with compatible SFP slots
• Short-range server-to-switch or switch-to-switch links up to the supported copper distance

Key specifications

• Interface type: RJ-45
• Maximum data transfer rate: 1250 Mbit/s
• Form factor: SFP (Small Form-factor Pluggable)
• Housing: metal, silver colour
• Weight: 0.02 kg
• Mean time between failures (MTBF): 1,000,000 hours

How to use

Install the module into a compatible SFP slot while the host device is powered on or according to the host manufacturer’s guidance for hot-plugging. Connect a suitable RJ-45 copper cable to the module’s connector and ensure the link partner is configured for the appropriate Ethernet speed and duplex settings. Verify link status and diagnostics from the host device firmware or network management tools to confirm proper operation.

Recommendations

Ensure the host device officially supports third-party SFP modules and, if required, enable any vendor compatibility settings. Use properly shielded twisted-pair cabling rated for Gigabit Ethernet and avoid exposing the module to excessive mechanical stress or moisture. For remote diagnostics, confirm that the device firmware supports any available digital diagnostic monitoring features provided by the transceiver.