SFP+-transceivermodule BlueOptics AOM-TSFP-709DMZ-AVG 10000 Mbit/s 850 nm

The BlueOptics AOM-TSFP-709DMZ-AVG is an SFP+ fiber optic transceiver module designed for 10 Gbit/s class links. It transmits at an 850 nm wavelength and fits standard SFP+ ports, providing a compact and lightweight solution for short-reach multimode fiber connections. The module's silver housing and 20 g weight make it easy to handle and install in switch, router, or server transceiver slots without adding significant bulk.

Advantages

This SFP+ transceiver supports a maximum data transfer rate of 10000 Mbit/s and is optimized for short-range multimode fiber applications at 850 nm. Its industry-standard SFP+ form factor ensures compatibility with a wide range of networking equipment that accepts SFP+ optics. The compact, low-weight design simplifies deployment and reduces mechanical stress on connector cages.

Suitable for

• 10 Gbit/s short-reach connections over multimode fiber
• Upgrading network switches and routers with SFP+ ports
• High-speed server uplinks in data center racks
• Local area network (LAN) backbone segments

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s
• Operating wavelength: 850 nm
• Typical application: short-reach multimode fiber links
• Product colour: Silver
• Weight: 0.02 kg

How to use

Ensure the target transceiver slot is compatible with SFP+ modules and that the device firmware supports third-party optics if required. Handle the transceiver by its housing, avoid touching the optical interfaces, and insert it into the SFP+ port until it clicks into place. Connect the appropriate multimode fiber cable with matching LC connectors and verify link status through the host device. Remove dust caps only immediately before connecting fiber to prevent contamination.

Recommendations

Use this transceiver with multimode fiber (OM3/OM4 recommended for 10 Gbit/s over typical short-reach distances) and verify that transceiver and host device settings match the 10 Gbit/s link parameters. Store unused modules in anti-static packaging and keep optical endfaces clean to maintain signal integrity.