SFP-transceivermodule BlueOptics FIBER-3000-1S-WWR-BO 1250 Mbit/s

The BlueOptics FIBER-3000-1S-WWR-BO is an SFP transceiver module designed for multimode fiber optic links with LC duplex connectors. It supports a maximum data transfer rate of 1250 Mbit/s (1000Base-SX) using 850 nm wavelength for both transmit and receive functions. The module follows MSA/SFP form-factor standards, is CE, RoHS and FCC compliant and weighs approximately 20 g, allowing straightforward integration into compatible switches, routers and other networking hardware that accept SFP modules.

Advantages

This SFP transceiver provides simultaneous transmit and receive capability over multimode fiber with LC duplex connection and is compatible with common hardware platforms that support MSA-compliant SFP modules. Components are sourced from established vendors and the module is tested for interoperability and stable operation. With a compact silver housing and lightweight design, installation and replacement are simple and unobtrusive in dense rack environments. Digital Diagnostics Monitoring (DDM/DOM) is supported when the host device exposes the interface, enabling real-time monitoring of supply voltage, laser currents, optical power and temperature.

Suitable for

Key specifications

How to use

Insert the BlueOptics SFP transceiver into an SFP slot of a compatible switch, router or storage device while the host is powered according to the vendor’s instructions for hot-pluggable modules. Connect LC duplex multimode fiber patch cables to the module’s LC ports, ensuring correct TX/RX orientation. Confirm that the host device recognizes the module and, if required, enable DDM/DOM monitoring within the host management system. Follow the network equipment manufacturer’s guidelines for link configuration, VLANs, and speed/duplex settings where applicable.

Recommendations

Use multimode fiber with appropriate patch cables and maintain proper bend radius and connector cleanliness to preserve signal quality. Verify host compatibility with 1000Base-SX SFP modules and enable DDM/DOM only if the management platform supports it. For long-term reliability, perform occasional inspections of optical connectors and keep firmware of host devices up to date.