SFP-transceivermodule BlueOptics SFP-10G-BX-U-20-DE-BO 10000 Mbit/s SFP+

The BlueOptics SFP-10G-BX-U-20-DE-BO is an SFP+ fiber optic transceiver module designed for 10 Gigabit data transmission with a maximum rate of 10000 Mbit/s. Housed in a metal casing and compliant with RoHS and FCC standards, this compact module weighs approximately 20 g and uses an LC fiber connector for single-mode links with distances up to 20,000 m. The module supports bidirectional (BiDi) transmission technology to increase capacity on existing fiber infrastructure and includes digital diagnostics for real-time monitoring of optoelectronic parameters.

Advantages

The module offers long-range single-mode operation and BiDi wavelength division multiplexing to double usable bandwidth on a single fiber. Its metal housing provides mechanical robustness and thermal stability while the low weight simplifies handling and installation. Built to industry form-factor standards, the transceiver is interoperable with compatible SFP+ ports and supports digital diagnostics to assist troubleshooting and maintenance.

Suitable for

Key specifications

How to use

Ensure the host device supports SFP+ transceivers and that the port is powered down or follows the manufacturer's hot-plug instructions. Remove dust caps from the LC connector and the module before insertion. Insert the transceiver into the SFP+ slot until it clicks into place and secure any retention mechanism. Connect the single-mode fiber patch cable, taking care to match the required wavelengths for BiDi operation if applicable. After installation, verify link status on the host device and, if available, use the digital diagnostics interface to monitor supply voltage, laser bias current, optical output and input power, and module temperature.

Recommendations

Handle the transceiver by its housing and avoid touching the LC connector endface. Use appropriate ESD protection during handling and storage. Ensure fiber connectors are clean before mating to prevent signal loss or damage. Match transceiver wavelength pairs appropriately when deploying BiDi modules and consult equipment compatibility lists if vendor interoperability is required.