Account Contact
Je winkelwagen
Verzending via DPD & FedEx
Hulp nodig? Vraag het de AI

SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm

SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
65,46 €
The BlueOptics SFP-10G-LR-X is a fiber optic SFP+ transceiver module engineered for high-speed data transfer up to 10000 Mbit/s. Operating at a wavelength of 1310 nm, this module supports long-distance optical links and is suitable for use in data centers, aggregation switches, and enterprise networ... Lees meer
Voorraad 2628 Code 1483096 Merk BLUEOPTICS Model SFP-10G-LR-X-BO Garantie 2 jaar

Bezorging & retourneren

Verwachte bezorgdatum dinsdag, november 3
Je blijft op de hoogte via ons uitgebreide trackingsysteem
Betaalopties
BetaalkaartVisaMastercardPayPalApple PayGoogle PayBankoverschrijving

The BlueOptics SFP-10G-LR-X is a fiber optic SFP+ transceiver module engineered for high-speed data transfer up to 10000 Mbit/s. Operating at a wavelength of 1310 nm, this module supports long-distance optical links and is suitable for use in data centers, aggregation switches, and enterprise networks. The module conforms to standard SFP+ form factor and fits into compatible SFP+ ports to provide a reliable physical layer interface for 10 Gigabit Ethernet and other high-bandwidth applications.

Advantages

The transceiver provides a compact SFP+ form factor with a maximum data transfer rate of 10000 Mbit/s and single-mode fiber support at 1310 nm wavelength, enabling extended reach. It offers interoperability with a wide range of networking equipment that accept standard SFP+ modules, facilitating flexible deployment and straightforward upgrades. The module is designed for stable optical performance over long distances while maintaining low latency suitable for demanding network traffic.

Suitable for

Key specifications

How to use

Install the BlueOptics SFP-10G-LR-X by inserting the transceiver into an available SFP+ port on compatible networking equipment until it latches. Connect the appropriate single-mode optical fiber cable with matching connectors to the transceiver’s optical interface. Ensure port settings and link speeds on the switch or router are configured for 10 Gigabit operation. Monitor link status indicators on the device and verify optical link parameters through management interfaces as needed.

Recommendations

Before installation, verify compatibility with your switch or router and confirm that fiber type, connector type, and link budget meet your deployment requirements. Use certified single-mode fiber and check optical power budgets for long-distance runs. Handle the optical ports and connectors with care to avoid contamination — keep protective caps on when not in use and clean connectors according to established procedures.

Belangrijkste kenmerken
  • 10 Gigabit Ethernet links between switches and routers
  • Long-distance single-mode fiber connections in metro or campus networks
  • Data center uplinks and aggregation ports
  • Network equipment requiring SFP+ form-factor transceivers
  • Interface type: SFP+
  • Maximum data transfer rate: 10000 Mbit/s
  • Operating wavelength: 1310 nm
  • Form factor: SFP+ optical transceiver
  • Media type: single-mode fiber (optical)
Specificaties
Aantal per verpakking
1 pc(s)
Duplexsysteem
Full
Ethernet LAN
Yes
Glasvezel-ethernetbekabelingstechnologie
10GBASE
Glasvezelconnector
LC
Golflengte
1310 nm
Interfacetype
SFP+
Maximale overdrachtsafstand
10000 m
Maximale overdrachtssnelheid
10000 Mbit/s
Rx-golflengte (max.)
1310 nm
Singlemode-vezel (SMF) ondersteund
Yes
Tx-golflengte (max.)
1310 nm
Type ethernetinterface
10 Gigabit Ethernet
Type SFP-transceiver
Fiber optic
Prijsverloop van de afgelopen 6 maanden
SFP-transceivermodule BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Actueel
65,46 €
Laagste
64,32 €
Hoogste
70,05 €
Wijziging 24 uur
+1,14 €   +2%
Week
+0,49 €   +1%
Maand
-0,04 €   0%

Populaire producten in deze categorie

Verkoper: UAB KUR LT · Laisvės pr. 125A, LT-06118 Vilnius, Litouwen · Bedrijfsnummer 303192950 · Btw-nummer LT100008198612 · Verzending vanuit de EU (Litouwen)
Hoi, ik ben de AI-assistent van DistriNode. Ik help je graag met het vinden van producten, het vergelijken van opties, het maken van offerte-PDF's of het openen van supportaanvragen.
Alle categorieën