SFP-transceivermodule BlueOptics SFP-10GD-BX27-40-BO 10000 Mbit/s

The BlueOptics SFP-10GD-BX27-40-BO is a single-mode SFP+ fiber optic transceiver module designed for 10 Gbit/s data transmission. It comes in a metal housing, operates at 3.3 V and weighs approximately 3 g. The module uses a LC duplex-compatible simplex interface for bidirectional transmission over a single fiber with separate transmit and receive wavelengths, and is designed to meet industry MSA mechanical and electrical standards for SFP+ modules.

Advantages

This SFP+ transceiver supports up to 10000 Mbit/s and is built to industry MSA standards, enabling interoperable use in a wide range of networking equipment that accepts SFP+ modules. The metal housing provides mechanical stability and heat dissipation. Compact and lightweight, the module is suitable for dense port environments. Built-in digital diagnostics (DDM/DOM) support allows monitoring of voltage, laser bias current, transmit power, receive power and temperature when supported by the host hardware.

Suitable for

• 10G Ethernet links over single-mode fiber
• Long-reach uplinks and backbone connections (up to specified vendor distance for single-mode BX links)
• Interconnection of switches, routers, storage systems and fiber-compatible appliances

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Optical mode: Single-mode fiber, bidirectional (BX) operation with distinct TX/RX wavelengths
• Connector: LC simplex (single-fiber bidirectional)
• Power supply: 3.3 V operating voltage
• Housing: Metal enclosure
• Weight: approx. 0.003 kg
• Digital diagnostics support: DDM/DOM (subject to host support)

How to use

Install the BlueOptics SFP-10GD-BX27-40-BO by inserting it into an SFP+ slot on compatible network hardware until it latches. Use an appropriate LC single-mode patch cord designed for simplex BX transceivers, and connect the transmit (TX) port of one transceiver to the receive (RX) port of the corresponding remote transceiver, observing the correct wavelengths for the BX link. Ensure the host device supports the module and, if applicable, enable or verify DDM/DOM monitoring in the device management interface to access live diagnostic data. Power and link status indicators on the host will reflect proper connection and operation.

Recommendations

Verify compatibility with your switch, router or storage platform prior to installation. Use quality single-mode LC patch cords and follow manufacturer guidelines for fiber routing and bend radius. If you require remote monitoring, confirm that the host hardware exposes DDM/DOM parameters. For installation in dense environments, consider airflow and heat dissipation due to multiple modules operating in adjacent ports.