SFP+ transceivermodule BlueOptics SFP+LRM10G-BO 10000 Mbit/s 1310 nm

The BlueOptics SFP+LRM10G-BO is a fiber optic SFP+ transceiver module designed for 10 Gbit/s networks using a 1310 nm wavelength. It uses an LC duplex connector for multimode fiber and supports a maximum transfer distance of around 220 m. Housed in a compact silver SFP+ form factor and weighing approximately 20 g, the module implements MSA-compliant optical interfaces and offers digital diagnostics for real-time monitoring of operating parameters.

Advantages

The transceiver provides 10 Gbit/s data throughput with simultaneous transmit and receive functions over multimode fiber, minimizing electromagnetic interference and enabling low-latency links. Built to MSA standards and populated with industry-grade components, it delivers extended service life with an MTBF around 3,000,000 hours. Integrated Digital Diagnostics Monitoring (DDM/DOM) allows remote readout of voltage, laser current, optical power and temperature when supported by host hardware.

Suitable for

Key specifications

How to use

Install the SFP+ transceiver into an SFP+ port until it seats securely and engage the host device retention mechanism. Connect LC duplex multimode fiber patch cables ensuring correct transmit/receive orientation. If the host device supports DDM/DOM, enable monitoring to read real-time parameters such as optical power and module temperature. Follow the host vendor’s instructions for compatibility checks, firmware or driver settings and link negotiation. Handle the transceiver by its housing and keep dust caps on unused fiber connectors to preserve optical performance.

Recommendations

Use multimode fiber rated for 10 Gbit/s to achieve the specified 220 m range and verify host compatibility for DDM/DOM support. Store and operate the module within the manufacturer’s recommended temperature and humidity ranges, and clean LC connectors with appropriate fiber cleaning tools before insertion to avoid link issues.