SFP+-transceivermodule BlueOptics SFPP-10G-SR-C-BO 10G 850nm

The BlueOptics SFPP-10G-SR-C-BO is an SFP+ fiber optic transceiver module designed for 10GBASE-SR applications. It supports a maximum data transfer rate of 10000 Mbit/s and operates at an 850 nm wavelength over multimode fiber. The module uses an LC duplex connector, requires a 3.3 V supply and is a compact, lightweight silver-coloured transceiver suitable for high-speed network links up to typical short-reach distances. Weighing approximately 2 g, it conforms to MSA SFP+ form-factor expectations and includes digital diagnostics capability when supported by host hardware.

Advantages

The module provides 10 Gbit/s optical connectivity in a small SFP+ form factor, enabling easy replacement or upgrade of compatible transceiver ports. Operating at 850 nm and designed for multimode fiber with LC duplex interfaces, it offers low-latency optical transmission that is immune to electromagnetic interference. The transceiver is lightweight and compact, with a standard 3.3 V interface that matches most SFP+ slots and supports digital diagnostic monitoring when the host device implements the feature.

Suitable for

Key specifications

How to use

Insert the SFP+ transceiver into a compatible SFP+ port on your switch, router, server or storage device until it latches. Connect an LC duplex multimode fiber patch cable between transceivers or to a patch panel, ensuring correct transmit/receive orientation. Ensure the host device supports 10GBASE-SR optics and, if required, enable or verify Digital Diagnostics Monitoring (DDM/DOM) in the device to view real-time parameters. Power is supplied through the host slot (3.3 V), and normal link negotiation occurs according to the connected equipment's configuration.

Recommendations

Use high-quality OM3/OM4 multimode fiber and LC duplex patch cords for optimal reach and performance. Verify compatibility with the target hardware and enable DDM/DOM in the host system if monitoring of voltage, temperature, transmit power and receive power is needed. Avoid excessive bending of fiber cables and follow ESD precautions when handling the transceiver.