SFP-transceivermodule BlueOptics TN-SFP-BXU2-BO 1250 Mbit/s 1310 nm

The BlueOptics TN-SFP-BXU2-BO is an SFP fiber optic transceiver module designed for single-mode links operating at a wavelength of 1310 nm and supporting a maximum data transfer rate of 1250 Mbit/s. Housed in a metal enclosure with a compact SFP form factor and weighing approximately 20 g, this module is intended for use in network equipment that accepts SFP modules and requires reliable optical connectivity for point-to-point or short-range metro links.

Advantages

The metal housing provides mechanical durability and electromagnetic shielding while the standard SFP form factor ensures broad compatibility with switches, routers and media converters that support SFP modules. With a defined wavelength of 1310 nm and a data rate up to 1250 Mbit/s, the module supports common optical network topologies and can be used in environments where single-mode fiber is deployed. Its lightweight design simplifies handling and installation in stacked or densely populated chassis.

Suitable for

• Single-mode fiber point-to-point links
• SPF-compatible switches and routers
• Metro access and short-range optical links
• Media converters and network equipment requiring 1310 nm optics

Key specifications

• Interface type: SFP (small form-factor pluggable)
• Maximum data transfer rate: 1250 Mbit/s
• Wavelength: 1310 nm
• Form factor: SFP metal housing
• Weight: 0.02 kg
• Colour: Silver

How to use

Install the transceiver into an SFP slot of a compatible network device until it clicks into place, then connect the single-mode fiber patch cable with the appropriate connector type. Ensure the connected equipment is configured for the optical interface and matches the module's data rate and wavelength. Monitor link status via the host device to confirm successful negotiation and optical signal presence. For removal, power down or disable the port if required by the host device, then depress the module latch and pull the transceiver out straight to avoid damaging the fiber connector.

Recommendations

Handle the optical interface with care: keep protective caps on unused optical ports, avoid touching the fiber end faces, and clean connectors before insertion. Match fiber type and connector standard to ensure optimal performance and verify that the host equipment supports the SFP module specifications.