SSD Transcend 64 GB 2,5 inch SATA3 SSD370S

Transcend SATA III 6Gb/s SSD370S is a 2.5-inch solid state drive that combines MLC NAND flash, DDR3 DRAM cache and a SATA III interface to deliver fast read and write performance and reliable endurance. The compact 6.8 mm height and resistance to shock and vibration make this SSD suitable for upgrading desktops, laptops and compatible gaming consoles, providing quicker system responsiveness and lower power consumption compared with traditional hard disk drives.

Advantages

The SSD370S uses high-quality MLC NAND to improve stability and longevity while DDR3 DRAM cache and a dedicated controller enable sustained transfer speeds up to 560 MB/s read and 460 MB/s write. Built-in features such as ECC, garbage collection and wear-leveling protect data integrity and extend drive lifespan. DevSleep support helps reduce power draw when the drive is idle. Transcend also supplies SSD Scope software for drive health monitoring and performance optimization.

Key specifications

• Interface: SATA III 6Gb/s
• Form factor: 2.5-inch, 6.8 mm height
• Flash type: MLC NAND
• Cache: DDR3 DRAM cache
• Max sequential read: up to 560 MB/s
• Max sequential write: up to 460 MB/s
• Endurance: Terabytes Written (TBW) up to 408 TB
• Features: ECC, garbage collection, wear-leveling, DevSleep
• Software: Transcend SSD Scope for health monitoring and optimization

How to use

Install the SSD370S into a compatible 2.5-inch bay or mounting bracket, connect it to a SATA III port and a power connector, then initialize and format the drive in your operating system. For system migration, use cloning utilities or the bundled Transcend SSD Scope software to copy your OS and data. After installation, enable appropriate BIOS/UEFI settings (AHCI mode recommended) to ensure SATA III performance and confirm DevSleep configuration if power savings are desired.

Recommendations

For best results, back up important data before performing cloning or installation, update your motherboard firmware and storage drivers, and use Transcend SSD Scope to monitor drive health and apply firmware updates when available.