Sunlu High-Speed ABS filament (wit) 1,75 mm 1 kg (ABS H-S W)

This SUNLU high-speed ABS filament is made for modern FDM printers that can push extrusion rates. It balances the classic strength and heat resistance of ABS with the flow behaviour needed at speeds up to 300 mm/s. The spool is vacuum sealed with desiccant so it arrives dry and stays reliable.

Highlights

• ABS material with low shrinkage for dimensionally stable parts
• Consistent 1.75 mm diameter with ±0.02 mm tolerance
• Print speed up to 300 mm/s for productive workflows
• High toughness, good layer adhesion and a matte white finish
• Vacuum sealed with desiccant to reduce moisture issues
• 1 kg plastic spool with 200 mm diameter

In daily use

Set your nozzle to 220–250 °C and a bed at 80–110 °C for a heated chamber or enclosure. The filament is optimized for fast printing but also handles more conservative speeds. Store it in a dry box after opening because ABS absorbs moisture. The white colour makes it easy to paint or to use as a base for prototypes.

Full specifications

• Material: ABS
• Filament diameter: 1.75 mm
• Diameter tolerance: ±0.02 mm
• Colour: White
• Net weight: 1 kg
• Gross weight: approx. 1.2 kg
• Recommended printing temperature: 220–250 °C
• Recommended bed temperature: 80–110 °C
• Recommended print speed: up to 300 mm/s
• Tensile strength: 40–60 MPa
• Elongation at break: 10–20%
• Density: 1.04 g/cm³
• Melt flow index: 10–15 g/10min (220 °C, 10 kg)
• Spool material: Plastic
• Spool diameter: 200 mm
• Spool width: 65 mm
• Spool hub diameter: 56 mm
• Vacuum sealed: Yes, with desiccant
• Compatibility: FDM 3D printers

Final note

This filament suits engineers and makers who want ABS performance at higher throughput without sacrificing layer quality. If your printer is built for high-speed printing and has a heated chamber, SUNLU ABS H-S W is a solid choice.