SUNLU PLA+ High-Speed olijfgroen filament 1.75mm 1kg voor FDM-printers

The SUNLU PLA+ High-Speed Olive Filament combines speed and precision for your FDM printer. This 1.75 mm filament in a rich olive green is formulated to flow smoothly at high velocities, enabling faster production times while maintaining excellent layer bonding. Whether you are creating prototypes, tools, or artistic pieces, this material delivers strength and a clean finish.

Advantages

Engineered for high-speed printing, this PLA+ has a wide speed range from 50 to 500 mm/s, allowing you to optimize your workflow without sacrificing detail. Its diameter tolerance of ±0.02 mm ensures uniform extrusion, reducing clogs and surface imperfections. The low-warpage formula works well on unheated beds in many cases, while the optimum bed temperature of 50–65 °C enhances adhesion for larger parts. Each spool is vacuum-sealed with a desiccant bag, keeping the filament dry and bubble-free, which contributes to consistent output. The tangle-free spool winding and smooth feed prevent interruptions, saving time and material.

Suitable for

• Fast-paced prototyping and concept validation
• Functional parts that require toughness and impact resistance
• Architectural models, engineering parts, and educational projects
• Printers equipped with high-speed hotends or direct drive extruders

Key specifications

• Material: PLA+ (Polylactic Acid Plus)
• Filament diameter: 1.75 mm (±0.02 mm tolerance)
• Net weight: 1 kg
• Colour: Olive Green
• Recommended nozzle temperature: 200–230 °C
• Recommended bed temperature: 50–65 °C
• Printing speed: 50–500 mm/s
• Density: 1.24 g/cm³
• Spool dimensions: 200 mm outer diameter, 66 mm width, 56 mm hub diameter
• Vacuum-sealed with desiccant
• Tangle-free, bubble-free

Recommendations

For optimal results, keep the filament dry. Store it in a sealed container with silica gel or use a filament dryer before printing if the spool has been exposed to humidity. Calibrate the extrusion multiplier and temperature based on your specific printer. Best to print on a clean surface with proper adhesion, and adjust the fan speed to balance cooling and layer adhesion. Start with 210 °C nozzle and 60 °C bed, then adjust if needed.