Tafel-wireless-router Cudy WR1300S — dualband 2,4/5 GHz, Wi‑Fi 5, Gigabit Ethernet, 4 LAN, USB, 4 antennes

Cudy mesh router with beamforming and MU‑MIMO provides focused wireless coverage and simultaneous data transmission to multiple devices. The device supports dual‑band Wi‑Fi 5 (802.11ac) with combined speeds up to 867 Mbps on the 5 GHz band, Gigabit Ethernet ports for wired connections, USB port, and can be managed via the Cudy App or web interface.

Advantages

Beamforming detects the direction of connected devices and concentrates the Wi‑Fi signal to improve coverage and connection stability. MU‑MIMO allows the router to serve several devices at once, reducing latency for smoother streaming and online gaming. Fast roaming enables a single SSID across mesh nodes for seamless handoffs between zones. Five Gigabit Ethernet ports provide reliable wired speeds up to 1000 Mbps for TVs, consoles and PCs. Built‑in parental controls let you set schedules and block websites, and both cloud and local control are available through the Cudy App.

Key specifications

• Form factor: tabletop router, white
• Wireless: dual‑band 2.4 GHz / 5 GHz, Wi‑Fi 5 (802.11ac)
• Wireless speed (5 GHz): up to 867 Mbps
• Ethernet: Gigabit Ethernet support
• Ethernet ports (RJ‑45): 4 LAN ports
• Ethernet WAN: supported
• USB: available
• Management: web‑based management and Cudy App (local and cloud control)

How to use

Unbox and place the router in a central location for optimal coverage. Connect the WAN port to your modem using an Ethernet cable and plug in power. Use the Cudy App or web interface to complete the initial setup: create a Wi‑Fi name (SSID), set a password and enable mesh mode if adding additional Cudy nodes. Configure parental controls and QoS as needed. For wired devices, connect via the Gigabit Ethernet LAN ports to ensure stable high‑speed connections.

Recommendations

For best performance, position mesh nodes with clear line‑of‑sight where possible and avoid placing the router near large metal objects or microwaves. Use the 5 GHz band for bandwidth‑intensive tasks and 2.4 GHz for broader coverage of legacy devices. Keep firmware updated through the Cudy App or web interface.