Team Group Team Elite - DDR4 - module - 16 GB - DIMM 288-PIN

The Team Group ELITE DDR4 16 GB 3200 MHz (model TED416G3200C2201) is a 288-pin DIMM memory module designed for desktop PCs and compatible systems. It operates at 1.2 V and supports DDR4 JEDEC specifications, offering up to 16 GB capacity per module and tested compatibility with mainstream DDR4 motherboards, including Intel X99 chipset platforms.

Advantages

This ELITE DDR4 module provides high clock speed (3200 MHz) with CAS latency CL22 for improved data throughput and multitasking. Operating at a low 1.2 V reduces power consumption compared with previous generations and lowers heat generation. The product has undergone QVL compatibility verification by motherboard manufacturers to ensure stable operation across a wide range of systems, and it is produced to meet JEDEC standards for reliability.

Suitable for

• Upgrading desktop PCs for faster memory performance
• Systems requiring 16 GB single-module configurations
• Dual-channel memory setups (paired modules) for increased bandwidth
• Workloads that benefit from higher memory frequency such as multitasking and content creation

Key specifications

• Capacity: 16 GB
• Memory type: DDR4
• Clock speed: 3200 MHz
• CAS latency: CL22
• Voltage: 1.2 V
• Form factor: 288-pin DIMM
• Model number: TED416G3200C2201
• EAN: 765441647794

How to use

Power off the PC and disconnect the power cable. Open the case to access the motherboard DIMM slots. Align the notch on the 288-pin DIMM module with the slot key and insert the module evenly until the side latches click into place. Reassemble the case, reconnect power and boot the system. Enter the BIOS/UEFI to confirm memory is recognized and, if needed, enable XMP/DOCP or set supported frequency/timings according to motherboard QVL guidance.

Recommendations

Install modules in matched pairs for dual-channel operation when higher bandwidth is required. Refer to the motherboard QVL for tested module combinations and BIOS settings to ensure compatibility and stability. Maintain adequate case ventilation to support low operating temperatures despite reduced power draw.