USB-hub ALOGIC Fusion SWIFT 4-in-1 USB 3.2 Gen 1 Type-A

The ALOGIC Fusion SWIFT 4-in-1 USB-A Hub expands a USB-A enabled laptop or device by providing four additional USB-A (USB 3.2 Gen 1 / USB 3.0) downstream ports with up to 5 Gbps data transfer. The compact, grey hub connects via its integrated USB-A cable and is powered through the host USB port, offering a small, portable solution to increase available USB-A connections without installing drivers.

Advantages

The hub adds four high-speed USB-A ports to your existing USB-A enabled laptop, enabling simultaneous connection of peripherals such as external drives, flash drives, printers, scanners, mouse and keyboard. End-to-end EMI shielding reduces interference from Wi‑Fi and other noise sources, and the plug-and-play design requires no additional software. Its compact dimensions and 0.21 m cable make it suitable for both desktop and mobile use.

Suitable for

• Connecting external hard drives and USB flash drives
• Attaching keyboard and mouse for extended workstation setups
• Connecting printers, scanners and other USB peripherals
• Expanding ports on older laptops and devices with USB-A only

Key specifications

• Interface: USB 3.2 Gen 1 (USB 3.0) Type-A
• Downstream ports: 4 × USB-A (USB 3.x) supporting up to 5 Gbps each
• Cable length: 0.21 m integrated USB-A cable
• Power: bus-powered via host USB port
• Colour: Grey
• Dimensions (W×D×H): 40 mm × 301 mm × 13 mm
• Brand / MPN: ALOGIC / UAFUUA-SGR

How to use

Plug the hub's integrated USB-A connector into a free USB-A port on your laptop or device. Once connected, the operating system will recognise the hub and attached devices automatically; no driver installation is required. Attach up to four USB-A peripherals to the downstream ports. For high-speed data transfers, connect compatible USB 3.0/3.2 devices and avoid routing the cable near strong sources of electromagnetic interference.

Recommendations

For best performance, connect high-bandwidth devices (such as external SSDs) one at a time or directly to the host when maximum throughput is required. Avoid overloading the hub with multiple high-power devices; if peripherals require significant power, use a powered USB hub or connect those devices directly to the host.