Ventilator XILENCE XPF120U.ARGB 120 mm, 500–1800 tpm, hydraulisch lager, 7–13,2 V, zwart

The XILENCE XPF120U.ARGB is a 120 mm case fan designed to provide airflow for system chassis and component cooling. It operates within a rated voltage range of 7–13.2 V and supports rotational speeds from 500 to 1800 RPM. The fan features a hydraulic bearing intended to reduce noise and extend operational life, and its black finish integrates with most system interiors. Integrated ARGB lighting with an Infinity Mirror style center offers adjustable visual effects when connected to a compatible controller or motherboard.

Advantages

The hydraulic bearing and balanced rotor blade design reduce mechanical noise and support longer continuous operation. PWM-capable control and a wide voltage range allow the fan to adjust speed to cooling demand, aiming to balance airflow and acoustic performance. Vibration-damping rubber pads help lower frame-transmitted vibrations. The ARGB lighting with a 3-pin connector permits synchronization with many motherboard lighting systems and provides multi-layered reflective effects for visual customization.

Suitable for

Key specifications

How to use

Install the fan into an available 120 mm mount in the case using the supplied screws or equivalent mounting hardware, ensuring the airflow direction matches intake or exhaust needs. Connect the power cable to a compatible fan header on the motherboard or to a fan controller that supports the fan's voltage and PWM characteristics. For ARGB lighting, attach the 3-pin ARGB connector to a compatible addressable RGB header on the motherboard or to a separate ARGB controller, and configure lighting through the motherboard or controller software. Ensure cables are routed to avoid contact with the fan blades before powering the system.

Recommendations

For balanced cooling and low noise, use PWM control via the motherboard and set fan curves to increase speed under higher load. Periodically clean the fan and surrounding filters to maintain airflow; check mounting and rubber pads for secure placement to minimize vibration. Verify ARGB header compatibility before installation to ensure proper lighting control.