Wandkachel Black & Decker BXWSH2001E 2000W, instelbare thermostaat, IP22, LED-display, afstandsbediening, wandmontage

Wall heater Black & Decker BXWSH2001E is an indoor wall-mountable and portable electric heater rated at 2000 W with an adjustable thermostat. It features an LED display, remote control and button controls, two power levels, oscillation and an on/off switch. IP22 splash protection, overheat protection and a timer up to 24 hours make it suitable for use in bathrooms and other indoor spaces up to about 20 m².

Advantages

The heater combines a clear LED display and simple button or remote operation with an adjustable thermostat (10–49 °C) and two power settings for flexible heating. IP22 protection and built-in overheat safety increase safe use in bathroom environments, while the 24-hour timer and oscillation improve comfort and energy control. Wall-mountable design saves floor space while allowing portable placement when needed.

Suitable for

• Small to medium indoor rooms up to 20 m²
• Bathrooms and other splash-prone areas (IP22)
• Quick supplementary heating for living rooms, bedrooms or home offices
• Wall installation where permanent heating is preferred

Key specifications

• Rated power: nominal 2000 W (power range 1000–2500 W)
• Adjustable thermostat with temperature range 10–49 °C
• Two power levels and selectable oscillation
• Timer up to 24 hours and countdown timer function
• Controls: LED display, buttons and remote control
• Protection rating: IP22 (splash protected)
• Safety: built-in overheat protection
• Suitable room area: up to 20 m²

How to use

Mount the unit on a suitable wall following the included user manual, or place it where portable operation is required. Connect to a compatible mains outlet, switch the heater on using the power button or the remote, set the desired temperature on the adjustable thermostat (10–49 °C) and select one of the two power levels. Use the timer to schedule operation up to 24 hours and enable oscillation if even air distribution is needed. Do not obstruct airflow around the heater and allow clearances recommended in the manual.

Recommendations

Do not cover the heater during operation to avoid risk of overheating. Ensure installation and use comply with local electrical safety rules; keep the unit dry and avoid direct water jet exposure despite IP22 splash protection.