XFP-transceivermodule BlueOptics 407-10948 10000 Mbit/s 1310 nm

The BlueOptics 407-10948 XFP transceiver module is designed for high-speed fiber optic links and supports a data rate of 10000 Mbit/s. Operating at a wavelength of 1310 nm, this module is intended for use in single-mode and multimode network environments where reliable 10 Gbps connectivity is required. The compact XFP form factor provides hot-swappable installation and compatibility with XFP-capable network equipment.

Advantages

The module delivers stable 10 Gbit/s performance over optical fiber with a 1310 nm operating wavelength, providing a balance between reach and dispersion characteristics. Its XFP interface ensures wide compatibility with switches, routers and optical transponders that accept XFP modules. The transceiver is engineered for plug-and-play deployment and supports hot-swap replacement to minimize network downtime.

Suitable for

• 10 Gbit/s fiber backbone links
• Aggregation ports on switches and routers
• Data center uplinks and server connectivity
• Metropolitan area network (MAN) links

Key specifications

• Interface type: XFP
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Operating wavelength: 1310 nm
• Form factor: XFP hot-swappable transceiver

How to use

Before installation, confirm that the host device supports XFP modules and the required 10 Gbit/s link settings. Handle the transceiver by its housing and avoid touching the optical connector end-face. Insert the module into the XFP slot until it seats securely and engage any latching mechanism on the host. Connect the appropriate optical fiber cable and verify link status on the network device. For removal, disengage the latch and pull the module straight out, covering the connector with protective caps when not connected.

Recommendations

Operate the transceiver within the manufacturer’s specified temperature and humidity ranges and use clean, undamaged optical connectors to maintain link quality. Use single-mode or multimode fiber consistent with your network design and verify transceiver compatibility with your equipment firmware to ensure stable 10 Gbit/s operation.