2,5 inch Dell HD 600G SAS 10K 2.5 T-13SE E/C harde schijf, 600 GB, 10.000 tpm, SAS-interface

2.5" Dell HD 600G SAS 10K 2.5 T-13SE E/C hard drive, 600 GB, 10,000 RPM, SAS interface is an enterprise-class 2.5-inch hard disk designed for server and storage environments. It offers 600 GB raw capacity on a 2.5" form factor with a 10,000 RPM spindle speed and a Serial Attached SCSI (SAS) interface to support high-throughput, low-latency block storage. The drive is intended for use in systems and enclosures that accept 2.5" SAS drives and is compatible with common enterprise features such as RAID configurations and hot-swap bays when supported by the host platform.

Advantages

The drive combines a small 2.5" form factor with enterprise performance characteristics, delivering a balance of capacity and rotational speed suitable for mixed workload environments. The 10,000 RPM spindle speed reduces seek and access latency compared with lower-speed drives, while the SAS interface provides robust data transfer rates and multipath support in enterprise storage architectures. The design is suitable for use in dense server configurations, minimizing footprint while enabling shared storage in RAID or multi-drive arrays.

Suitable for

• Database servers with moderate to high I/O requirements
• Virtualization hosts and VM storage where consistent performance is needed
• RAID arrays requiring enterprise-class rotational drives
• Storage enclosures and blade systems that accept 2.5" SAS drives
• Workloads with frequent random reads and writes

Key specifications

• Form factor: 2.5 inch
• Capacity: 600 GB raw storage
• Rotational speed: 10,000 RPM
• Interface: Serial Attached SCSI (SAS)
• Target use: Enterprise/server storage, block-level workloads
• Compatibility: Designed for systems accepting 2.5" SAS enterprise drives

How to use

Install the drive into a compatible 2.5" SAS bay or backplane following the server or storage enclosure manufacturer instructions. When installing into a hot-swap bay, ensure the host supports hot-plug operations and that the drive is properly seated before placing it online. Configure the drive within the server OS or storage controller for use in standalone mode or as part of a RAID array according to workload and redundancy requirements. Perform any required firmware updates using authorized vendor tools and validate drive visibility in the system management interface.

Recommendations

Use this drive in enterprise environments with appropriate cooling, vibration control, and power protection. For critical applications, deploy in redundant RAID levels and maintain regular backup and monitoring to detect early signs of degradation. Match drive firmware and RAID controller settings to vendor guidelines to ensure optimal performance and reliability.