Actieve DisplayPort 1.2 naar HDMI-kabel DeLOCK 85957 3m

This active DisplayPort 1.2 to HDMI cable by Delock enables connection of a DisplayPort source, such as a computer or graphics card, to an HDMI sink like a monitor or TV. The cable supports 4K resolution at 60 Hz and provides an active signal conversion, making it suitable for graphics cards that do not output DP++ signals. The cable is 3 m long, has a diameter of 7.2 mm and comes in black with a DisplayPort connector on one end and an HDMI connector on the other.

Advantages

The cable performs active conversion from DisplayPort to HDMI, ensuring compatibility with devices and graphics cards lacking DP++ output. It supports up to 4K at 60 Hz for high-resolution displays and its 3 m length offers flexibility in device placement. The fixed DisplayPort-to-HDMI wiring avoids the need for separate adapters or converters.

Suitable for

• Connecting a computer or laptop with DisplayPort output to an HDMI monitor or TV
• Using a graphics card without DP++ support to drive an HDMI display
• Home office or meeting-room setups where longer cable runs (3 m) are needed
• Media playback or presentations on 4K displays at 60 Hz

Key specifications

• Standard: DisplayPort 1.2 to HDMI
• Resolution support: up to 4K @ 60 Hz
• Cable length: 3 m
• Diameter: 7.2 mm
• Connector 1: DisplayPort
• Connector 2: HDMI
• Colour: Black
• Brand / MPN / EAN: DELOCK / 85957 / 4043619859573

How to use

Connect the DisplayPort end to the source device (for example a PC or graphics card) and plug the HDMI end into the target display (monitor or TV). Ensure both devices are powered on and select the correct input on the display. Because the cable contains active conversion electronics, no additional adapter or external power should be required in typical setups.

Recommendations

For best results, use displays and source devices that support the desired 4K@60Hz mode and set the output resolution in the source device’s display settings. Avoid sharp bends and excessive strain on the connectors; route the 3 m cable to prevent kinking.