Afgeschermde outdoor-patchkabel EQUIP Cat.6A S/FTP 0,5 m, RJ-45–RJ-45, zwart

The Shielded Outdoor Patch Cable EQUIP Cat.6A S/FTP 0.5 m with RJ-45 connectors is a short, rugged Ethernet patch cable designed for outdoor and industrial network connections. With S/FTP shielding and a durable LDPE jacket, it supports up to 10 Gbit/s data transfer and is built to resist UV, moisture, oil and temperature extremes for reliable performance in exposed environments.

Advantages

S/FTP (foil with braided drain) shielding and PIMF construction reduce crosstalk and electromagnetic interference for a stable 10 Gbit/s connection. The stranded bare copper conductors and 500 MHz performance ensure high-frequency transmission, while the molded RJ-45 boots with strain relief and a snagless design protect the connectors during installation. The outdoor LDPE jacket is UV- and oil-resistant and provides splash-water protection and abrasion resistance.

Suitable for

• Short outdoor links between networking equipment (patching)
• Outdoor surveillance camera connections
• Connecting PoE and PoE+ powered devices
• Industrial or harsh-environment network points

Key specifications

• Product: EQUIP Cat.6A S/FTP outdoor patch cable
• Length: 0.5 m
• Connectors: RJ-45 straight male – RJ-45 straight male
• Cable type: Cat6a S/FTP (S‑STP), PIMF
• Conductor: stranded bare copper (4 x 2 AWG 27/7)
• Bandwidth/performance: 500 MHz
• Data rate: 10 000 Mbit/s (10 Gbit/s)
• PoE support: suitable for PoE and PoE+
• Jacket material: LDPE, black, outdoor-rated
• Standards: ISO/IEC 11801, EN 50173
• Environmental resistance: anti-UV, oil resistant (IEC 60811-2-1), splash water protected (IEC 60811-1-3)
• Operating temperature: -40 °C to 65 °C
• Compliance: RoHS

How to use

Connect one RJ-45 end to a network device (switch, router, PoE injector or camera) and the other end to the corresponding port on the receiving device. Ensure connectors are fully inserted until the latch clicks. Use the 0.5 m cable for tidy short connections or patching panels in outdoor enclosures, avoiding sharp bends and excessive tensile strain on the cable and connectors.

Recommendations

For prolonged outdoor deployment, route the cable through suitable conduits or cable trays and avoid direct prolonged exposure to standing water. Verify PoE power budget compatibility for connected devices and secure connectors to prevent mechanical stress during wind or vibration.