APC Smart-UPS C, Line-Interactive, 2000VA, Rackmount 2U, 230V, 6x IEC C13-stopcontacten, USB- en seriële communicatie, AVR, grafisch LCD

The APC Smart-UPS C Line-Interactive 2000VA Rackmount 2U is a 230V UPS designed for small to medium business environments to maintain uptime and protect critical electronics. This 2U rackmount unit delivers 2000VA (1300 W) of output power, provides pure sine wave output and includes a built-in sealed lead-acid battery. The UPS features an IEC 320 C20 input, six IEC 320 C13 outlets, two IEC jumper cables, USB and Serial communication ports, and an intuitive graphic LCD interface. The unit operates in green mode for high efficiency and offers surge protection against lightning, sags, brownouts and spikes. The sealed battery is user-replaceable and covered by a 2-year UPS warranty.

Advantages

The Smart-UPS C provides reliable line-interactive voltage regulation with pure sine wave output suitable for sensitive rack-mounted equipment. Its 2U rack form factor and included IEC outlets and jumper cables simplify installation in server racks. The integrated LCD and communication ports enable local monitoring and management. Energy-efficient green mode improves operating efficiency while built-in surge protection and a replaceable lead-acid battery support business continuity.

Suitable for

• Rack-mounted servers and network switches in small to medium business racks
• Storage devices and SAN/NAS appliances requiring pure sine wave power
• Office IT equipment that needs short-term backup during power disturbances
• Environments requiring IEC C13 outlet compatibility and compact 2U form factor

Key specifications

• Model: APC Smart-UPS C Line-Interactive 2000VA (SMC2000I-2U)
• Output capacity: 2000 VA / 1300 W
• Form factor: 2U rackmount, 230 V
• Input connector: IEC 320 C20
• Outlets: 6 × IEC 320 C13
• Cables: 2 × IEC jumper cables included
• Battery: sealed lead-acid, user-replaceable, rechargeable (approx. 3 hours recharge)
• Weight: 26.2 kg
• Warranty: 2 years (UPS)

How to use

Install the UPS into a standard 19-inch rack occupying 2U of space and connect the input to a compatible 230 V supply using the IEC C20 connector. Connect equipment to the six IEC C13 outlets; use the included jumper cables if needed for rack power distribution. Power on the UPS and use the graphic LCD for status, configuration and monitoring. For integration with management software, connect the USB or Serial port to a server or management station. Replace the sealed lead-acid battery with an APC replacement battery cartridge when runtime degrades to restore original performance.

Recommendations

Position the UPS in a well-ventilated rack space, avoid direct heat sources, and follow APC guidelines for battery replacement intervals. Use the communication ports and LCD to monitor load and battery status regularly to ensure uninterrupted protection.