Boor SDS plus Bosch 8 mm 8x100x225 mm met slangadapter (2608901759)

Bosch SDS plus drill bit, diameter 8 mm, size 8x100x225 mm, supplied with a hose adapter for dust extraction. Designed for SDS plus rotary hammers, this masonry bit is intended for drilling clean, accurate holes in concrete, brick and other common masonry materials. The integrated shank profile ensures secure retention in SDS plus chucks and reliable power transfer during hammer drilling.

Advantages

The SDS plus 8 mm drill bit offers stable drilling performance and dimensional precision for routine installation and fixing tasks. The hardened carbide tip improves wear resistance and maintains cutting effectiveness over repeated use. The included hose adapter enables connection to a compatible vacuum or dust-extraction system to reduce on-site dust and improve visibility at the drilling point.

Suitable for

• Drilling holes for anchors, plugs and fastenings in concrete and masonry
• Installation work requiring accurate 8 mm diameters
• Jobs where dust control or vacuum extraction is needed

Key specifications

• Drill type: SDS plus hammer drill bit
• Diameter: 8 mm
• Working length: 100 mm
• Total length: 225 mm
• Tip material: carbide tip for masonry drilling
• Includes: hose adapter for dust extraction
• Compatibility: SDS plus rotary hammers

How to use

Insert the SDS plus shank fully into the rotary hammer chuck until it locks. Select the hammer drilling mode on the tool and align the bit with the marked drilling position. Start drilling at low speed to create a guide groove, then apply steady pressure while allowing the hammer action to perform the cutting. If dust extraction is required, attach a compatible vacuum hose to the supplied adapter before drilling. Withdraw the bit periodically to clear debris when drilling deep holes.

Recommendations

Wear appropriate personal protective equipment such as safety glasses and a dust mask. Use a vacuum or dust-extraction system with the supplied hose adapter for cleaner work and improved visibility. Match drilling speed and pressure to the material to avoid excessive wear of the carbide tip. Replace the bit when the cutting performance decreases significantly.