CPU-koeler Silentware Bora Performance — 120mm PWM-ventilator, 215 W TDP, 5 heatpipes, ondersteuning voor Intel- en AMD-sockets

Silentware Bora Performance is an air CPU cooler featuring a single 120mm PWM-controlled fan and five copper heatpipes. Rated for up to 215W TDP, this cooler is designed to deliver reliable heat dissipation for high‑load CPUs in gaming systems, workstations and modest overclocking setups. The compact tower layout balances cooling efficiency with compatibility across a range of system builds and Intel and AMD sockets.

Advantages

The Bora Performance combines a 120mm PWM fan for variable-speed control with five heatpipes to improve thermal transfer from the CPU to the fin stack, providing efficient heat removal under sustained loads. Its design focuses on straightforward mounting and broad socket compatibility, allowing a single cooler to be used across Intel and AMD platforms. The PWM fan enables automatic speed adjustment according to CPU temperature, helping to reduce noise at low to medium loads while increasing airflow when required.

Suitable for

• Gaming desktops with mid to high power CPUs
• Content creation and workstation systems under sustained load
• Light to moderate overclocking of compatible CPUs
• Systems where a balance of cooling performance and compact size is required

Key specifications

• Cooling type: Air cooler with tower heatsink
• Fan size: 120 mm PWM fan for automatic speed control
• Thermal capacity: Up to 215 W TDP
• Heatpipes: Five heatpipes for improved heat transfer
• Compatibility: Designed for common Intel and AMD CPU sockets
• Mounting: User-oriented mounting system for typical desktop cases
• Noise management: PWM-controlled fan for dynamic noise vs. performance balance

How to use

Install the Silentware Bora Performance following the included mounting instructions for your CPU socket type. Begin by preparing the motherboard with compatible backplate or brackets, apply a thin layer of thermal compound to the CPU heatspreader, and position the cooler so the heatpipes align with clearance constraints in your case. Secure the cooler with the provided fasteners, connect the PWM fan header to the motherboard CPU_FAN or CPU_OPT header, and verify fan control in BIOS or via motherboard software. Monitor temperatures under idle and load after installation to confirm proper contact and fan operation.

Recommendations

For optimal performance, ensure adequate case airflow by maintaining at least one intake and one exhaust fan. Use motherboard PWM fan control profiles to balance noise and cooling, and check RAM and PCIe clearance before installation if using tall memory modules or compact cases.