Ballistix Max zwart, DDR4-5100, CL19 - 16 GB dual kit

The Ballistix MAX DDR4 memory module delivers 16 GB of high-speed system memory in a 2 x 8 GB kit with a rated clock of 5100 MHz. Built in a 288-pin DIMM form factor with DDR4 technology and a CAS latency of 19, this memory kit is engineered for systems that require fast data transfer and responsive multitasking. The kit operates at a nominal voltage of 1.5 V and is intended for desktop platforms where high-frequency DDR4 modules are supported.

Advantages

The Ballistix MAX kit provides high clock frequency and low CAS latency for improved application responsiveness and reduced memory access times. The dual-module kit supports dual-channel operation when installed in compatible motherboards, enabling higher aggregate bandwidth compared with single-module configurations. The 288-pin DIMM form factor ensures compatibility with standard desktop memory slots that accept DDR4 modules.

Suitable for

• High-performance gaming rigs that require fast DDR4 memory
• Content creation workstations handling large files and multitasking
• Overclocking and system tuning for advanced users
• General desktop systems needing a 16 GB memory capacity with 2-module configuration

Key specifications

• Total capacity: 16 GB (2 x 8 GB)
• Memory type: DDR4
• Rated clock speed: 5100 MHz
• CAS latency: 19
• Number of pins / form factor: 288-pin DIMM
• Operating voltage: 1.5 V

How to use

Power down the computer and disconnect the power cable before installing memory. Open the system chassis and locate the DDR4-compatible DIMM slots on the motherboard. Consult the motherboard manual for the correct slot population order to enable dual-channel operation. Align the module notch with the slot key and press firmly until the retention clips engage. Reconnect power and start the system; verify the memory is detected in the BIOS/UEFI and the operating system. If overclocking or enabling XMP/DOCP profiles, adjust settings in BIOS/UEFI according to motherboard guidance and stability testing procedures.

Recommendations

Install the modules in the recommended paired slots to take advantage of dual-channel bandwidth. Check motherboard compatibility for supported DDR4 frequencies and enable any supported memory profiles in BIOS/UEFI for rated performance. When overclocking, monitor temperatures and system stability; follow motherboard vendor guidance for voltage and timing adjustments.